Article No. 388001
Tex 4/100
E-glass reinforcement fabric covered with polymeric plastics
Product specifications
On delivery
Mesh size
4 x 4 mm
Surface weight
Approx. 160 g/m²
Warp tear strength
Min. 2000 N
Weft tear strength
Min. 2000 N
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Absorption of movements of the substrate
- Crack repair
- Composite thermal insulation systems
- Reinforcement of the iQ Top SLS and Power Protect [eco] systems
Properties
- Permanently elastic
- Rot-proof
- Alkali-resistant
- Non-slip
- W: 1 m / L: 50 m
-
Application
-
Stapling
Staple the fabric on the sanded, vacuumed wood planks after priming the substrate and allowing to dry. Staple approx. 6 times per m².
Overlapping zone ≥ 10 cm lengthwise and crosswise.
Adhesive bonding
Push the fabric into the coating mass over its entire area.
Overlapping zone ≥ 10 cm lengthwise and crosswise.
-
-
Storage / shelf life
-
Store upright in original container in a dry place.
-
Usage
-
Approx. 1.1 m²/m²
-
General information
-
Deviations from applicable regulations must be agreed separately.
The relevant test certificates must be observed when planning and carrying out work.
-