Of course, our competent field representatives are also available wherever you are to provide additional, system-specific information and help with choosing the perfect system for your project.
Coating metal and plastic
The right material for every application
In addition to wood, many other surfaces can be found on buildings and structures of all kinds. They often include components made of metal or plastic. There are a variety of coating options for protecting and/or finishing these surfaces.
Once the substrate has been cleaned and freed of dirt, release agents and non-load-bearing old coatings, Remmers offers various systems and one-pot systems that offer both protection and a high-quality aesthetic finish. Whether you are painting guttering, coating fences and railings, renovating plastic windows or coating radiators, the Remmers range offers the right material for every application.
An optimum coated finish can be achieved even on plastic and metal façades with a large surface area. Most products can be applied by brushing, spraying and rolling to achieve the best possible surface area output.
Gutters, downpipes, fences and railings
Knowing the type of metal and the corresponding substrate preparation is crucial for successful metal coatings. Iron and steel are cleaned and prepared using diluted products. If corrosion is present, it must be thoroughly removed to ensure good adhesion.
Galvanised steel requires zinc washing or cleaning with a wetting agent. Special cleaners such as Aqua MR-91 Multi-Purpose Cleaner are suitable for this. After wet sanding and rinsing with water, the coating can be applied to galvanised steel. The Multi-Purpose Cleaner can be applied using the wet sanding method: as soon as the galvanised steel has been washed off with water, it can be coated.
This means quick and easy coating of gutters, downpipes, metal windows and parts that have already been pre-coated at the factory. The Remmers range includes products that visually enhance the surface while also protecting against corrosion, making them ideal for exterior applications. Non-ferrous metals such as copper, non-anodised aluminium, brass or bronze can also be coated by brushing, spraying and rolling after pre-sanding.
Renovation and design of façades
Even large metal or plastic façades, which usually have a powder coating, are easy to renovate with selected Remmers products. As a rule, metal or plastic façades are found in industrial areas or business parks. Although these façades with their practical design offer plenty of interior storage space, the building exterior leaves a lot to be desired in terms of adequate façade protection. The façades are often exposed to the weather without any structural protection. This means that the powder coating is subjected to high stress. After just a few years, these façades are usually in need of renovation. This is exactly where Remmers products come into play: the multifunctional 3in1 varnishes protect the façade against corrosion and also give it a uniform, attractive surface appearance.
Windows, doors and gates
Dimensionally stable components are also manufactured from metal or plastic. Coating systems for windows, doors and gates require a special property – block resistance. This property means that when two components meet, such as window frames and window sashes, they do not get jammed or stick together due to the coating. The product attributes of the Remmers range are clearly presented to give you an immediate overview and make sure that no products are used that do not meet the requirements. A variety of 3 in 1 products can also be used here, eliminating the need for a additional primer, adhesive primer or similar.
Radiator coating
The mostly water-based paints and varnishes in the Remmers range can also be used indoors. When it comes to interior metal coating, a wide variety of radiator types come into play: panel, sectional, tubular and so on.
Over the years, wear and tear on radiator coatings can cause them to become yellowed, dirty or even slightly rusty – that’s when a fresh coat of paint is needed. Once the surfaces have been sanded, they can be coated 1-2 times with the 3 in 1 paints to restore them to their former glory. Depending on the type of radiator, spray application is best suited for coating.
Peace of mind guaranteed
Benefit from our expert advice, our promise of optimum safety for our extensive product range, and our express delivery service.
Express delivery
Our express delivery is the ideal service for anyone who needs their order to be delivered fast.
Specialist representatives directly on site
Our specialist representatives are on hand to provide you with personalised support and advice – wherever you are.
Extensive product range
From building and floor protection products through to wood preservatives, we have everything you need!
Systems with Remmers guarantee
You can be sure of a reliable and high-quality solution for every application.
