Article No. 388001
Tex 4/100
E-glass reinforcement fabric covered with polymeric plastics
Product specifications
On delivery
Mesh size
4 x 4 mm
Surface weight
Approx. 160 g/m²
Warp tear strength
Min. 2000 N
Weft tear strength
Min. 2000 N
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Absorption of movements of the substrate
- Crack repair
- Composite thermal insulation systems
- Reinforcement of the iQ Top SLS and Power Protect [eco] systems
Properties
- Permanently elastic
- Rot-proof
- Alkali-resistant
- Non-slip
- W: 1 m / L: 50 m
-
Application
-
Stapling
Staple the fabric on the sanded, vacuumed wood planks after priming the substrate and allowing to dry. Staple approx. 6 times per m².
Overlapping zone ≥ 10 cm lengthwise and crosswise.
Adhesive bonding
Push the fabric into the coating mass over its entire area.
-
-
Storage / shelf life
-
Store upright in original container in a dry place.
-
-
Usage
-
Approx. 1.1 m²/m²
-
-
General information
-
Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.
The relevant test certificates must be observed when planning and carrying out work.
-
