Article No. 577862

    Betofix EM 4 2K

    PCC I (RM) concrete replacement mortar for static repair of concrete structures

    Variant
    5778 | Betofix EM 4 2K (cement grey)
    Size / Quantity

    Product specifications

    On delivery

    Flexural tensile strength 1 day: 5 N/mm²
    7 days: 8 N/mm²
    28 days: 12 N/mm²
    90 days: 14 N/mm²
    Compressive strength 1 day: 23 N/mm²
    7 days: 47 N/mm²
    28 days: 55 N/mm²
    90 days: 58 N/mm²
    Dynamic E-modulus 38 x 10³ N/mm² (at 23 °C)
    External surveillance KIWA
    Bulk density of fresh mortar Approx. 2.3 kg/dm³
    Maximum grain size 4 mm
    Consistency Plastic
    Bulk density Approx. 1.8 kg/dm³
    Shrinkage 7 days: -0.32 mm/m
    28 days: -0.51 mm/m
    90 days: -0.61 mm/m

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • Concrete replacement for structurally relevant repairs
    • Concrete replacement according to
      - DIN EN 1504-3
      - Rili-SIB DAfStb 2001
      - ZTV-ING
    • Repair and anode embedding mortar for cathodic corrosion protection

    Properties

    • High mechanical resistance
    • High resistance to water penetration
    • Very low shrinkage
    • Can be applied by machine
    • Freeze/thaw-resistant
    • Preparation
      • Substrate requirements

        Concrete surface:
        Stable, clean, dust-free
        Observe the applicable technical regulations for the following parameters:
        - Adhesive pull strength of the substrate
        - Minimum roughness/roughness depth

        Pre-wet the substrate so that it is slightly moist.

      • Preparations

        Reinforcement:
        Degree of purity SA 2 ½ if applying corrosion protection, otherwise SA 2

    • Application
      • Application temperature: min. 5 °C max. 30 °C
      • Toothed trowel / toothed blade
      • Positive mixer / Mixing silo
      • Working time
        (+20 °C): Approx. 60 minutes

         

        Layer thickness

        Single layer 12 mm to 50 mm

         

        A bonding layer is required when applying manually.

        Apply wet-on-wet.

         

        Subsequent processing

        Protect fresh mortar surfaces from wind, direct sunlight, rain and/or frost for at least 3 days so that they do not dry too quickly.

         

        Machine working

        Please contact Remmers Technical Service (phone +49 5432 83900) before applying with machine processing.

         

    • Working tools / cleaning
      • Toothed trowel / toothed blade
      • Positive mixer / Mixing silo
      • Mixer, trowel, aluminium rule, finishing trowel, power trowel

      • Clean tools with water while the material is still fresh.

    • Storage / shelf life
      • Protect form moisture
      • Shelf-life 12 months
      • If stored in an unopened container and in a dry place, the product will keep for approx. 12 months.

    • Usage
      • 2.0 kg / mm thick layer / m²
      • Approx. 2.0 kg/m²/mm layer thickness or 2.0 kg/dm³

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.