• Aqua FKL-402-Fugenkittlösung

    Article No. 236805

    Aqua FKL-402 Joint Filler Liquid

    Water-based joint filler liquid for parquet and wooden flooring

    Colour: clear | 2368
    Size / Quantity

    Product specifications

    On delivery

    Density (20°C) 1.04 g/m³
    Colour milky, transparent once dry
    Odour mild
    Viscosity liquid

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use indoors
    • for wood floors
    • For professional users only
    • Interior wood
    • Filling parquet and wooden floors


    • Water-based
    • Low volume shrinkage
    • Low solvent, environmentally compatible, mild odour
    • Quick-drying
    • Preparation
      • Substrate requirements

        The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.

    • Application
      • Shake before use
      • Temperature of the material, air and substrate: from min. +15 °C to max. +25 °C
      • Filling knife
      • Application requirements

        Temperature of the material, air and substrate: from min. +15 °C to max. +25 °C.

      • Shake well before use.

        Apply with a smoothing spatula before final sanding.

        Carry out final sanding once dry.

        Repeat the process if necessary.

        Then apply your chosen system product for wood treatment.

        Seal opened containers well and use contents as soon as possible.

    • Application instructions
      • Drying time: can be worked over after 45-60 minutes
      • Check colour, adhesion and compatibility with the substrate by setting up a trial area.

      • Drying

        Practice values at +20 °C and 65% relative humidity.

      • Thinning

        Ready to use

    • Working tools / cleaning
      • Filling knife
      • Flexible scraper

      • Clean tools immediately after use with water and detergent.

        Tools must be free of rust.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • Shelf-life 24 months
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 24 months.

    • Usage
      • Approx. 50 g / m² per layer applied
      • Approx. 50 ml/m²
        Actual application rate: dependent on the nature of the floor/joints.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.