Aqua FKL-402 Joint Filler Liquid

The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.

Temperature of the material, air and substrate: from min. +15 °C to max. +25 °C.

Shake well before use.

Apply with a smoothing spatula before final sanding.

Carry out final sanding once dry.

Repeat the process if necessary.

Then apply your chosen system product for wood treatment.

Seal opened containers well and use contents as soon as possible.

Check colour, adhesion and compatibility with the substrate by setting up a trial area.

Practice values at +20 °C and 65% relative humidity.

Ready to use

Flexible scraper

Clean tools immediately after use with water and detergent.

Tools must be free of rust.

If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 24 months.

Approx. 50 ml/m²
Actual application rate: dependent on the nature of the floor/joints.

Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.