Article No. 378901
Water-based stain for softwood (reactive dyes for a pronounced positive effect)
Product specifications
On delivery
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- For a pronounced positive grain effect on softwood (strong emphasis of the hard growth rings)
- Textured softwoods
- For emphasising the medullary rays and ray flecks on hardwood (e.g. beech and oak)
Properties
- Base colours for producing ready-to-use stains
- Colour intensity can be adjusted using Aqua PB-006
- Pronounced positive grain effect, strong emphasis of the hard growth rings
- Compatible with solvent-based and water-based varnishes
-
Preparation
-
Substrate requirements
The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.
Wood moisture content: 8-12%
-
Preparations
Softwood: Sand the raw wood lengthways with P 80-120 grit.
Hardwood: Sand the raw wood lengthways with P 120-180 grit.
Coating should be carried out immediately after sanding the bare wood.
-
-
Application
-
Stir well, including during application or after a break in work.
Spray.
Flow cup gun: nozzle size: 1.0 - 1.6 mm, atomiser air pressure: 1.0 - 2.0 bar.
Seal opened containers well and use contents as soon as possible.
-
-
Application instructions
-
Check colour, adhesion and compatibility with the substrate by setting up a trial area.
-
Drying
Practice values at +20 °C and 65% relative humidity.
Low temperatures, poor ventilation and high humidity delay drying.
Use a smoothing brush (fibre/leather brush) or duster to remove spray residue/excess material.
Do not use forced drying.
-
Thinning
With Aqua PB-006 clear
(with max. 5% water if necessary)
-
-
Working tools / cleaning
-
Flow cup gun
-
Clean tools with water or Aqua RK-898 Cleaning Concentrate immediately after use.
Ensure that any residue from cleaning is disposed of correctly.
-
-
Storage / shelf life
-
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
-
-
Usage
-
80 - 120 ml/m²
-
-
Disposal instructions
-
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-
