Care & Maintenance Kit

Shake well before use.

If necessary, soak cotton cloth with cleaner and wipe the surface in the direction of the grain; avoid intensive rubbing on the surface.

Leave to dry for approx. 30 minutes.

In cases of stubborn dirt, water marks and light scratches, rub the surface with the abrasive pad included in the kit in the direction of the grain until a uniform wood surface is achieved. Then remove dust from the treated surface.

Work in clear Hard Wax Oil evenly with the 2nd special cloth.

Remove any excess material after approx. 20-30 minutes.

Afterwards, wipe dry with a cotton cloth.

The entire surface should be wiped once from visible edge to visible edge.

Please do not use any solvent-based products, microfibre cloths, scouring agents, aggressive cleaning agents or steam cleaners, as they will damage the surface.

Do not use on areas directly exposed to sunlight or on heated surfaces.

Any material that is not made of wood (e.g. covers, glass, door handles) must not come into contact with the cleaning product. If contact does occur, the material should be rinsed carefully with water.

Risk of spontaneous ignition (DGUV Information 209-046).
Do not use in the same workplace as NC-based varnishes or stains. Collect contaminated textiles (e.g. cleaning cloths, work clothing, dust bags) in fireproof waste containers and dispose of in a fireproof manner (under water).

Ensure good ventilation.

After approx. 30 minutes
Treat the surface with care over the following days.

The coating may take significantly longer to dry thoroughly in lower temperatures, at high humidity or if the maximum layer thickness has been exceeded.

Practice values at +20 °C and 65% relative humidity.

Ready to use

Lint-free cotton cloth

If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 24 months.

5 - 10 ml/m² per coat
The application rate depends heavily on the absorbency of the wood

Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.