Article No. 016001

    iQ-Therm 2.0 30/50/80/120

    Mineral nonwoven laminated strips made of rigid polyurethane foam for creating capillary-active interior insulation


    Product variants

    Downloads & documents

    Technical Data Sheet
    Declaration of performance
    ➥Show all documents (in different languages) for download / dispatch

    Brochures

    product.brochures.loading

    Product specifications

    On delivery

    Thermal conductivity (λ 10 dry) Lambda rating values (DE) for thicknesses
    d < 80 mm: 0.029 W/(mK)
    80 mm ≤ d < 120 mm: 0.027 W/(mK)
    d ≤120 mm: 0.026 W/(mK)
    Water vapour diffusion resistance 40 - 200
    Thermal conductivity λ dry Nominal lambda values (EU) for thicknesses
    d < 80 mm: 0.028 W/(mK)
    80 mm ≤ d < 120 mm: 0.026 W/(mK)
    d ≥ 120 mm: 0.025 W/(mK)
    Design value for thermal conductivity approx. 0.003 W/(mK) higher in each case (once installed)
    Dry density > 30 kg/m³

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Product details Application Usage / application examples Notes

    Field of application

    • For use on walls indoors and ceilings
    • Energy efficiency upgrades
    • Mould control and prevention in existing buildings
    • Implementation of the hygienic minimum heat insulation level in existing buildings
    • Improving the room climate by increasing the wall surface temperature

    Properties

    • Strip-shaped
    • Excellent thermal insulation
    • Water vapour permeable
    • Capillary active when used in a system
    • Lambda rating value in the installed state approx. 0.003 W/(mK) higher in each case
    • Fire behaviour class B-s1, d0 (DIN EN 13501-1)
    • Building material class B1 flame retardant according to DIN 4102-1
    • Low construction height, choice of 30, 50, 80 & 120 mm
    • Easy to apply
    • Thermal insulation material according to DIN 4108-10
    • Preparation
      • Substrate requirements

        The substrate must be load-bearing, even, clean, dry and free from adhesion-reducing substances.

        Remove wallpaper and dispersion coatings.

      • Preparations

        Level off and even out highly uneven substrates – use SP Level to close up joints and even out surfaces.

    • Application
      • Application temperature: min. 5 °C
      • Jigsaw / Cutter

      • Pre-wet absorbent substrates.

        Apply iQ M universal to the substrate as a scratch coat.

        Apply iQ M universal wet-on-wet with a notched trowel as the first mortar layer on the edge insulation strip and wall.

        Position and press the iQ-Therm 2.0 strips into the adhesive bed. Finish the interior insulation strip by strip. To do this, prepare the bed joints with iQ M universal. Leave joints between the strips free. Avoid cross-joints!

        Align using a floating rule.

    • Application instructions

      • Mark the desired lengths on the iQ-Therm 2.0 strips. Cut to size with a cutter knife.

        Prepare bed joints with iQ M universal. Do not glue butt joints!

        Avoid creating cross joints.

        Make sure that full-surface bonding is achieved.

        Cut with a cutter knife, insulation knife or plunge saw.

    • Working tools / cleaning
      • Jigsaw / Cutter

      • Cutter knife

    • Storage / shelf life
      • Store frost-free / close containers

      • Dry and frost-free.

    • Usage

      • Approx. 0.85 strips/running m
        Approx. 6.8 strips/m²

    • General information

      • Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.

    • Disposal instructions

      • The product must be disposed of in accordance with the official regulations.

    Systemproducts