Water vapour permeable floors

Systems to protect against rising damp and heavy loads

The versatile solution

Breathable floor coatings have a long tradition at Remmers. For more than 20 years, we have championed the development of low-emission and AgBB-tested waterbased epoxy systems. In particular, thanks to their solvent-free ad plasticiser-free product components, waterbased coating systems provide a pleasant climate during processing and subsequent use.

This group of products can also be used safely on critical substrates e.g. calcium sulphate screed; magnesite screed and concrete that is in contact with the ground, so that there are no problems with the so-called osmotic blistering as a result of the water vapour diffusibility.

Increasingly water emulsifiable epoxy resins are being used in underground car parks where diffusion capability and resistance are important issues. These systems have also been tested by Remmers as an OS 8 surface protection system.

Water vapour permeable, coloured flow coating system with contrast blinding and slightly textured surface for moderate mechanical loads

Water vapour permeable floor systems

15 products found
 

View:

Article No. 600101

Pigmented, water-based primer

Article No. 638101

Water-based, pigmented, silk-gloss sealant

Article No. 637106

Water-based, pigmented, matt sealant

Article No. 627183

Polymer granules

Article No. 632111

Water-based, pigmented levelling layer and base coat

Article No. 363301

Transparent, silk matt sealant

Article No. 363104

Transparent, slip-resistant, silk-matt sealant

Article No. 363204

Transparent, slip-resistant, silk-gloss sealant

Article No. 673503

Anti-slip, transparent sealant

Article No. 630510

Coloured flakes for fully broadcast blinding

Article No. 622710

Coloured flakes for fully broadcast blinding

Article No. 440525

Fire-dried quartz sand