Hard grain covering with textured surface (dimpled hard grain surface) for moderate mechanical stresses.
The safe way to discharge voltage
Today, the protection of electronic parts is not just a priority in the electronics industry. The reason for this is increasingly sensitive components are being used in industry. A good example of this is the automotive industry. The Remmers ESD flooring systems address these requirements and meet the ESD standards.
In addition, the industry demands the combination of conductive and conducting floor areas because resistance, slip resistance, chemical and mechanical resilience all paly an important role.
This means that the systems offer the perfect starting point for safer working in highly sensitive application areas.
Conductive coloured sealing system
Conductive, coloured flow coating system with good resistance to chemicals, approved under the German Federal Water Act (WHG)
ESD-compliant, coloured flow coating system. Optionally available with non-slip surface R 10
Conductive systems11 products found
Article No. 116011
Transparent priming and mortar resin
Article No. 684110
Hard grain coating
Article No. 667111
Water-based transverse conducting layer
Article No. 697511
Article No. 666631
Article No. 142711
Article No. 143111
Dissipative, chemically resistant, crack-bridging coating
Article No. 122413
Pigmented primer and base layer
Article No. 674203
Mineral blinding material
Article No. 675110
Filler mixture with a special aggregate grading curve