Industrial hall for car components©

TX Floor SIC 01

Hard grain covering system with textured surface for moderate mechanical stresses.

TX Floor SIC 01

Textured coating with silicon carbide


  • High wear resistance
  • Slip-resistant surface
  • Available as a conductive variant


  • Plant engineering
  • Electrical industry
  • Metalworking industry

Test certificates*

  • Conductivity TX Floor AS 01
  • Chemical resistance list
  • Test of rear moisture penetration (Epoxy Primer PF New)
  • Slip resistance R 10

* For more detailed information, please refer to the applicable Technical Data Sheet/system configurations and the applicable test certificate. Test certificates may only apply to a specific product, meaning that the above-mentioned system is not necessarily part of the certified scope. Different R classes can be achieved by changing the seal coat and blinding material.

TX Floor SIC 01

3 products found


Article No. 122413

Pigmented primer and base layer

Article No. 440525

Fire-dried quartz sand

Article No. 684511

Hard grain coating