Finishing coats

For long renovation intervals

Induline top coats are primarily responsible for the extremely long renovation intervals of our coating systems. The binding agent quantity and quality are decisive for the paint quality and therefore, also the longevity of the entire surface. In particular, self-crosslinking acrylates of the latest generation are used. This guarantees early weather resistance and wet adhesion.

Customer benefits in detail:

  • Rational application: with Dynflow systems, spray robots and airless/airmix spray systems
  • Aesthetic surfaces: Very good flow properties, optimum pore wetting and pleasant haptics
  • Early usability and block resistance = painted elements can be delivered after a short time
  • Minimisation of the damage potential for ‘winter constructions’ and against water stains thanks to early water resistance
  • Thick-layer stains: brilliant glaze pattern and UV protection thanks to highly transparent iron oxide pigmentation and microfoam-optimised formulations
  • Opaque top coats: Helps the insulation effect against substances in the wood in the system with blocking Induline primers and intermediate coats
  • High permanent elasticity: for durable coatings

Brilliant glaze colour for soft wood

The entire overview is available in the PDF format

  • Wood type larch


    - Impregnation:
    Induline SW-900

    - Primer: Induline GW-360 pine (RC-250)

    - Intermediate and finish coat: Induline LW-700/20 sm pine / larch (RC-260)

    - Stress group: B2/I-E


    Other application areas:

    - One pot system (e.g. for façades): FT32323

    - Opaque colour: NCS S 3050-Y30R

  • Wood type European spruce


    - Impregnation:
    Induline SW-900

    - Primer: Induline GW-360 teak (RC-551)

    - Intermediate and finish coat: Induline LW-700/40 silk-gloss teak (RC-550)

    - Stress group: B3/II-E


    Other application areas:

    - One pot system (e.g. for façades): RC-550
    - Opaque colour: NCS S 4550-Y60R

  • Wood type European spruce


    - Impregnation:
    Induline SW-900

    - Primer: Induline GW-360 afrormosia (RC-450)

    - Intermediate and finish coat: Induline LW-700/40 afrormosia (RC-450)

    - Stress group: B3/II-E


    Other application areas:

    - One pot system (e.g. for façades): RC-450
    - Opaque colour: NCS S 4550-Y40R

  • Wood type European spruce


    - Impregnation:
    Induline SW-900

    - Primer: Induline GW-360 afrormosia (RC-450)

    - Intermediate and finish coat: Induline LW-700/40 silk-gloss light oak (RC-351)

    - Stress group: B3/II-E


    Other application areas:

    - One pot system (e.g. for façades): FT32326

    - Opaque colour: NCS S 4050-Y30R

  • Wood type European spruce


    - Impregnation: Induline SW-900

    - Primer: Induline GW-360 walnut (RC-652)

    - Intermediate and finish coat*: Induline LW-700/40 silk-gloss teak (RC-550)

    - Stress group: B4/II-E


    Other application areas:

    - One pot system (e.g. for façades) **: FT32327
    - Opaque colour **: NCS S 6030-Y40R

  • Wood type European spruce


    - Impregnation:
    Induline SW-900

    - Primer: Induline GW-360 pine (RC-250)

    - Intermediate and finish coat: Induline LW-700/40 silk-gloss pine (RC-250)

    - Stress group: B3/II-E


    Other application areas:

    - One pot system (e.g. for façades): RC-250
    - Opaque colour: NCS S 2070-Y20R

  • Wood type larch


    - Impregnation:
    Induline SW-900

    - Primer: Induline GW-360 pine (RC-250)

    - Intermediate and finish coat: Induline LW-700/40 silk-gloss afzelia (RC-330)

    - Stress group: B3/I-E


    Other application areas:

    - One pot system (e.g. for façades): FT32329

    - Opaque colour: NCS S 3065-Y20R

  • Wood type European spruce


    - Impregnation:
    Induline SW-900

    - Primer: Induline GW-360 teak (RC-551)

    - Intermediate and finish coat: Induline LW-700/40 silk-gloss pine (RC-250)

    - Stress group: B3/II-E


    Other application areas:

    - One pot system (e.g. for façades): FT32330

    - Opaque colour: NCS S 3560-Y30R

  • Wood type European spruce


    - Impregnation:
    Induline SW-900

    - Primer: Induline GW-360 teak (RC-551)

    - Intermediate and finish coat: Induline LW-700/40 silk-gloss afzelia (RC-490)

    - Stress group: B3/II-E


    Other application areas:

    - One pot system (e.g. for façades): FT32331

    - Opaque colour: NCS S 3560-Y40R

  • Wood type European spruce


    - Impregnation:
    Induline SW-900

    - Primer: Induline GW-360 walnut (RC-652)

    - Intermediate and finish coat: Induline LW-700/40 silk-gloss teak (RC-550)

    - Stress group: B4/II-E


    Other application areas:

    - One pot system (e.g. for façades): FT32327
    - Opaque colour: NCS S 6030-Y40R

  • Wood type European spruce


    - Impregnation: Induline SW-900

    - Primer: Induline GW-360 walnut (RC-652)

    - Intermediate and finish coat *: Induline LW-700/40 silk-gloss walnut (RC-652)

    - Stress group: B4/II-E


    Other application areas


    - One pot system (e.g. for façades) **: RC-652
    - Opaque colour **: NCS S 8010-Y70R

Brilliant glaze colour for hard woods

The entire overview is available in the PDF format

  • Wood type meranti


    - Impregnation:
    – ***

    - Primer: Induline GW-360 pine (RC-250)

    - Intermediate and finish coat*: Induline LW-700/40 afzelia (RC-330)

    - Stress group: B3/II-E


    Other application areas:

    - Equalising primer (for fluctuating wood optics): RC-250-EG

    - One pot system ** (e.g. for European spruce façades): FT32323

    - Opaque colour: NCS S 3050-Y30R

  • Wood type meranti


    - Impregnation:
    – ***

    - Primer: Induline GW-360 afrormosia (RC-450)

    - Intermediate and finish coat*: Induline LW-700/40 light oak (RC-351)

    - Stress group: B6/III-E


    Other application areas:

    - Equalising primer (for fluctuating wood optics): RC-450-EG

    - One pot system** (z. B. for European spruce façades): FT32314

    - Opaque colour**: NCS S 5040-Y40R

  • Wood type meranti


    - Impregnation:
    – ***

    - Primer: Induline GW-360 afrormosia (RC-450)

    - Intermediate and finish coat*: Induline LW-700/40 afrormosia (RC-450)

    - Stress group: B6/III-E


    Other application areas

    - Equalising primer (for fluctuating wood optics): RC-450-EG

    - One pot system** (z. B. for European spruce façades): FT32315

    - Opaque colour**: NCS S 4550-Y50R

  • Wood type meranti


    - Impregnation:
    – ***

    - Primer: Induline GW-360 teak (RC-551)

    - Intermediate and finish coat*: Induline LW-700/40 teak (RC-550)

    - Stress group: B6/III-E


    Other application areas:

    - Equalising primer (for fluctuating wood optics): RC-551-EG

    - One pot system** (z. B. for European spruce façades): FT32316

    - Opaque colour**: NCS S 5040-Y60R

  • Wood type meranti


    - Impregnation:
    – ***

    - Primer: Induline GW-360 walnut (RC-652)

    - Intermediate and finish coat*: Induline LW-700/40 walnut (RC-652)

    - Stress group: B7/III-E


    Other application areas:

    - Equalising primer (for fluctuating wood optics): RC-652-EG

    - One pot system ** (e.g. for European spruce façades): FT32317

    - Opaque colour**: NCS S 7020-Y70R

  • Wood type oak


    - Impregnation:

    - Primer: Induline GW-360 afzelia (RC-330)

    - Intermediate and finish coat*: Induline LW-700/40 afzelia (RC-330)

    - Stress group: B3/III-E


    Other application areas:

    - One pot system ** (e.g. for European spruce façades): FT32318

    - Opaque colour**: NCS S 4050-Y20R

  • Wood type oak


    - Impregnation:

    - Primer: Induline GW-360 teak (RC-551)

    - Intermediate and finish coat*: Induline LW-700/40 afrormosia (RC-450)

    - Stress group: B6/III-E


    Other application areas:

    - One pot system ** (e.g. for European spruce façades): FT32319

    - Opaque colour**: NCS S 4550-Y50R

  • Wood type oak


    - Impregnation:

    - Primer: Induline GW-360 teak (RC-551)

    - Intermediate and finish coat*: Induline LW-700/40 light oak (RC-351)

    - Stress group: B6/III-E


    Other application areas:

    - One pot system ** (e.g. for European spruce façades): FT32320

    - Opaque colour**: NCS S 5040-Y40R

  • Wood type oak


    - Impregnation:

    - Primer: Induline GW-360 walnut (RC-652)

    - Intermediate and finish coat*: Induline LW-700/40 afrormosia (RC-450)

    - Stress group: B7/III-E


    Other application areas:

    - One pot system ** (e.g. for European spruce façades): FT32321

    - Opaque colour**: NCS S 7020-Y40R

  • Wood type oak


    - Impregnation:

    - Primer: Induline GW-360 wenge (RC-770)

    - Intermediate and finish coat*: Induline LW-700/40 rosewood (RC-750)

    - Stress group: B7/III-E


    Other application areas:

    - One pot system ** (e.g. for European spruce façades): FT32322

    - Opaque colour**: NCS S 8010-Y70R

* for very scratch and hand cream-resistant surfaces on doors, please use Induline LW-700/DW-601instead of Induline LW-725/DW-625 !
** Slight, system-related colour differences are possible; these are approximations!
*** For Meranti with a raw density < 490 kg/m³ or > 400 kg/m³ we recommend impregnation with Induline SW-900 !

Finishing coats

9 products found
  Show all filters

View:

Article No. 796020

Water-based, translucent intermediate and finishing coat for spray application

Article No. 305720

Water-based, opaque intermediate and finishing coat applied by spraying

Article No. 1506805

Opaque, water-based intermediate and finishing coat for spraying

Article No. 165620

Water-based, all-in-one coating system with insulating effect for dimensionally stable building elements

Article No. 176805

Water-based, varnishing intermediate and final coat especially suited to electrostatic spraying

Article No. 343820

Water-based, translucent, UV-curing intermediate & finishing coat for spray application

Article No. 397120

Water-based, opaque, UV-curing intermediate and final coat for spray application

Article No. 307005

Opaque water-based industrial intermediate coating and finishing coat for spraying

Article No. 340003

Translucent, water-based intermediate and finishing coat for spraying