Structural coating (pimpled surface) for medium mechanical loads.
Industrial floors - floors for various environments
Industrial floor systems can be found in all major sectors. That is why we, along with our experienced partners, have been providing support to a wide range of industrial sectors from automobile or mechanical engineering through to pharamceutical and other industrial sectors where floors need to keep what they promise and meet certain criterias.
An important success factor is the durability of an industrial floor. The most common mechanical loads to which floors are exposed are: traffic, impact, abrasion or point loads. This is why floor systems need to be specifically selected and applied for the individual loads.
In addition, chemical resistance is becoming increasingly important loads with respect to the stricter ground and water pollution control regulations (WHG § 62/63). Numerous chemicals are used in industrial applications and these can impact heavily on the floor substrate. These include oils, greases, fuels and soluble salts through to various alkalis, very caustic acids and aggressive cleaning agents. The concentration of chemicals in combination with the temperature conditions create a base for selecting the optimum industrial floor.
Hard grain coating system with structured surface for medium mechanical loads.
Coloured flow coating system for dynamic and mechanical loads.
Coloured flow coating system with contrast dispersion and slightly structured surface for moderate mechanical loads.
Crack-bridging, flexible and coloured flow coating system for heavy mechanical loads. Optionally with matt or slip-resistant surface.
Sand-coloured epoxy mortar coating with slightly structured surface for heavy mechanical loads.
Industrial floor systems
20 products foundView: