MB PUReactive P-1

The substrate must be level, clean, dust-free and stable, and free of oil, grease and release agents.

Clean substrate with Thinner V103.

Apply the material using a suitable tool.

Subsequent application of the liquid waterproofing must take place within the specified time frame.

If kept in storage for long periods, or if dirt accumulates in the meantime, clean and prime surfaces again.

A suitability and compatibility test must always be conducted on unknown materials.

Paintbrush

Clean tools immediately after use with V 103.

If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

Approx. 75 ml/m²

The applicable regulations and legal requirements must be observed.

The relevant test certificates must be observed when planning and carrying out work.

Always set up a trial area/trial areas first.

Use only outdoors or in a well-ventilated area.

Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.