Article No. 016501
Reveal panel in the iQ-Therm 2.0 system
Product specifications
On delivery
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Energy efficiency upgrades
- Mould control and prevention in existing buildings
- Implementation of the hygienic minimum heat insulation level in existing buildings
- Improving the room climate by increasing the wall surface temperature
- Compensation of thermal bridging effects in ceiling and wall connection areas
- Optical correction of butt joints
Properties
- Excellent thermal insulation
- Thermal conductivity (nominal value) approx. 0.027 W/(m²*K)
- Low construction height
- Easy to apply
- Thermal insulation material according to DIN 4108-10
-
Preparation
-
Substrate requirements
The substrate must be load-bearing, even, clean, dry and free from adhesion-reducing substances.
-
Preparations
Level off and even out highly uneven substrates – use SP Level to close up joints and even out surfaces.
-
-
Application
-
Pre-wet absorbent substrates.
Apply iQ M universal to the substrate as a scratch coat.
Use a notched trowel to apply iQ Fix wet-on-wet to the rear of the reveal panel and substrate.
Position and push down the reveal panel starting from the bottom.
Align using a floating rule.
-
-
Application instructions
-
Mark the desired dimensions on the board.
Cut to size with a cutter knife or insulation knife.
Place the boards, starting at the bottom.
-
-
Working tools / cleaning
-
Cutter knife, insulation knife
-
-
Storage / shelf life
-
Dry and frost-free.
-
-
Usage
-
Approx. 2.8 panels/m²
-
-
General information
-
Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.
-
-
Disposal instructions
-
The product must be disposed of in accordance with the official regulations.
-
