Betofix KHB SR

Clean, dust-free and capable of supporting a load.

Reinforcement:
Degree of purity SA 2 ½ if applying corrosion protection, otherwise SA 2

Temperature of the material, air and substrate: from min. +5 °C to max. +30 °C

As bonding agent

Apply a single layer approx. 1 mm thick.

Apply the repair/concrete substitution mortar wet-on-wet.

As corrosion protection:

Apply 2 layers, each approx. 1 mm thick.

Wait approx. 3 hours before applying the second layer.

Apply the repair/concrete substitution mortar wet-on-wet.

Once it has hardened, mortar must not be made workable again by adding either water or more wet mortar.

Mixing tool, brush

Clean tools with water while the material is still fresh.

If stored in an unopened container and in a dry place, the product will keep for approx. 12 months.

Approx. 1.8 kg/m²/mm layer thickness as bonding course

The mixing water must be of drinking water quality.

The characteristic data of the product were calculated under laboratory conditions at 20°C and 65% relative humidity.

Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.