Article No. 055625
High-strength, swellable infill concrete
Downloads & documents
7 days > 40 N/mm²
28 days > 60 N/mm²
90 days > 65 N/mm² (on cube)
30 min.: ≥ 650 mm
60 min.: ≥ 650 mm
90 min.: ≥ 600 mm
*At 5°C < C; at 30°C = B
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Mineral substrates in dry, damp, wet and underwater areas
- Casting and underfilling of machines, steel constructions, train tracks, wind turbines and bridge bearings
- Filling joints between precast units, pre-fab elements and basement slabs
- Embedding supports in concrete in sleeve foundations
- Concrete repairs according to the 3rd amendment to the SIB Guideline
- For filling large cavities in concrete elements in accordance with the third amendment to the guidelines on the protection and repair of concrete structures (Rili-SIB)
- Complies with DAfStb Guideline: "Production and Use of Cement-Bound Poured Concrete and Poured Mortar"
- Interior and exterior use
- Good flow properties
- Swelling capable
- Water impermeable
- High sulphate resistance and low active alkali content (SR/NA)
- Maximum grain size: 6 mm
- Reaction to fire: class A1
- Compressive strength after 28 days: ≥ 60 N/mm²
Stable, clean, dust-free
Observe the applicable technical regulations for the following parameters:
- Adhesive pull strength of the substrate
- Minimum roughness/roughness depth
Pre-wet the substrate so that it is slightly moist.
20 - 240 mm
Shutter if necessary.
Pour continuously from one side or corner.
Re-compact if necessary.
Working tools / cleaning
Mixer: twin-shaft mixer, compulsory mixer
If using a mixing pump, use a batch mixer.
Clean tools with water while the material is still fresh.
Storage / shelf life
If stored in an unopened container and in a dry place, the product will keep for approx. 12 months.
Approx. 2.1 kg/dm³
Low chromate content in accordance with Directive 2003/53/EC.
The characteristic data given for the product was determined under laboratory conditions in accordance with DAfStb Guideline - VeBMR.
Alkaline binders may cause a dissolution process on non-ferrous metals.
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
Safety / regulations
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.