SP Top Q2

Clean, dust-free and capable of supporting a load.

Pre-wet the substrate so that it is slightly moist.

Pre-wet hydrophobic substrates with low surface tension water.

Contact layer

Using a suitable tool, apply the product as a contact layer.

Apply product in the desired coating thickness.

Smooth the surface using a suitable tool.

Finish the surface once set.

Once it has hardened, mortar must not be made workable again by adding either water or more wet mortar.

Protect wet mortar surfaces against frost, rain and drying out too quickly for at least 4 days.

Hairline/shrinkage cracks are safe and are not cause for complaint as they do not impair the properties of the mortar.

Apply additional diagonal reinforcement to the edges of building openings.

Do not interrupt work when coating continuous surfaces.

On larger surfaces and when there are several levels of scaffolding, coating should be carried out on all levels at the same time to avoid seams.

When coating continuous surfaces, only use materials with the same batch number.

Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product.

Please contact Remmers Technical Service (phone +49 5432 83900) before applying with machine processing.

Clean tools with water while the material is still fresh.

If stored in an unopened container and in a dry place, the product will keep for approx. 12 months.

Approx. 1.3 kg/m²/mm, up to approx. 3.5 kg/m² on average

Apply to a large enough trial area to determine the precise amount required.

May contain traces of pyrite (iron sulphide).

Low chromate content in accordance with Directive 2003/53/EC.

Do not use on gypsum-based substrates.

The mixing water must be of drinking water quality.

Always set up a trial area/trial areas first.

Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.

The relevant test certificates must be observed when planning and carrying out work.

Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.