• Color LA Historic
  • Color LA Historic
    • Color LA Historic
    • Color LA Historic

    Article No. 647605

    Color LA Historic

    Semi-scumbling, "true" silicone resin paint

    Colour: Special colours* | 6476
    Size / Quantity

    Product specifications

    On delivery

    Binder Organosilicon modified copolymers
    Density (20°C) Approx. 1.4 g/cm³ depending on the colour
    pH value 8 - 9
    Pigmentation Inorganic, alkali resistant, absolutely light-fast oxide pigments, TiO2-free
    Viscosity 2000 mPa∙s

    Once fully cured

    Once fully cured

    Degree of gloss Matt, mineral character
    Water absorption coefficient
    (DIN 52617)
    w < 0.1 kg/(m² ∙ h0.5)
    Water vapour permeability
    (DIN 52615)
    sd < 0.10 m

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use indoors and outdoors
    • Porous, mineral building materials
    • Historically valuable and protected monuments

    Properties

    • Water-based
    • Semi-scumbling
    • Highly water vapour permeable sd ≤ 0.1 m
    • Highly water-repelling w ≤ 0.1 kg/(m² ∙ h0.5)
    • Reversible
    • Low-stress
    • Matt, mineral character
    • Lime paint look
    • Preparation
      • Substrate requirements

        Dry, clean, free of dust and cracks and capable of supporting a load.

        Free of salts known to be damaging to building materials.

      • Preparations

        Use Primer Hydro HF to prime any sanding, firmly adhering substrates.

        If necessary, strengthen or consolidate the substrate using silicic acid ester (KSE) products (see also guidelines for KSE modular system).

    • Application
      • Application temperature: min. 5 °C max. 25 °C
      • By brush / By roller
      • Application requirements

        Temperature of the material, air and substrate: from min. +5 °C to max. +25 °C

      • Stir well.

        Coat the surface using a suitable tool.

        Depending on the conditions of the substrate, apply 1 or 2 coats.

        Wait at least 6 hours between coats.

    • Application instructions
      • Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product.

        When coating continuous surfaces, only use materials with the same batch number as slight differences in colour, gloss and texture may occur.

        Protect freshly coated surfaces from rain, direct sunlight, frost and condensation.

        When coating continuous surfaces, only use materials with the same batch number.

    • Working tools / cleaning
      • By brush / By roller
      • Brush, surface brush, lamb's wool roller

      • Clean tools, equipment and any splashed material immediately with water while still fresh.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • Shelf-life 12 months
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • Approx. 100 ml - 150 ml / m² per layer applied
      • Approx. 0.1 - 0.15 l/m² per coat

      • Application rates may vary depending on the condition of the surface.

        Apply to a large enough trial area to determine the precise amount required.

    • General information
      • Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.

        Always set up a trial area/trial areas first.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.