UMA-824 Universal Metal Adhesion Additive

The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.

Seal opened containers well and use contents as soon as possible.

Check colour, adhesion and compatibility with the substrate by setting up a trial area.

When applying water-based varnishes to non-stainless steels, rust spots may appear on the coating.

If necessary, apply a second coat once the first is sufficiently dry, with sanding in between. Do not mix the second coat of varnish with the metal adhesion additive.

The additive may cause slight colour changes in coloured varnishes.

As a primer for MultiSil on non-absorbent substrates:
refer to the MultiSil primer table

As a general principle, higher temperatures will reduce and lower temperatures will increase the times stated.

If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 6 months.

Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.