Article No. 292005
Environmentally compatible, water-dilutable coloured coating
Product specifications
On delivery
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Mineral substrates
- Coating collection basins and chambers in combination with Acrylic Primer SV
Properties
- Impermeable and resistant to: fuel oil (EL), unused engine and gear oil
- Elastic
- Water-dilutable
- Environmentally compatible
- Silk matt
- Colour stable
-
Preparation
-
Substrate requirements
Dry, clean, free of dust and cracks (except hairline cracks) and capable of supporting a load.
Free of salts known to be damaging to building materials.
-
Preparations
Remove any old coatings not capable of supporting a load, making sure not to leave any residue.
-
-
Application
-
Application requirements
Temperature of the material, air and substrate: from min. +5 °C to max. +25 °C
-
Stir well.
Coat the surface using a suitable tool.
Apply material in 3 coats.
Observe a waiting time of at least 24 hours between coats.
-
-
Application instructions
-
Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product.
When coating continuous surfaces, only use materials with the same batch number.
Protect freshly treated surfaces from driving rain, wind, sunlight and condensation.
-
-
Working tools / cleaning
-
Brush, flat brush, lamb's wool roller, airless spraying equipment
-
Clean tools, equipment and any splashed material immediately with water while still fresh.
-
-
Storage / shelf life
-
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
-
-
Usage
-
0.25 l/m² per coat
-
3 coats required.
Apply to a large enough trial area to determine the precise amount required.
-
-
General information
-
The current technical regulations must be observed.
The applicable regulations and legal requirements must be observed.
Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.
The relevant test certificates must be observed when planning and carrying out work.
Only for floors with low traffic, not in permanently wet areas
Always set up a trial area/trial areas first.
-
-
Disposal instructions
-
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-
