Article No. 314601
1-component, multi-layer colour varnish for use as sealing layer, filler, coloured coating and topcoat
Downloads & documents
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Interior wood
- Solid wood and wood-based materials
- Interior finishing work: e.g. panels, borders, cladding & interior doors
- High-quality furniture
- Single-component: simple and economical handling
- Functions: sealing layer, filler, coloured coating and topcoat
- Good flow properties
- Good hiding power
- Very high resistance to metal rings
- Good resistance to chemicals
- Good resistance to a wide range of commercially available hand creams
- Fire resistant
- 2K-ready: further improvement of the resistance to chemicals and scratches, as well as adhesion to glass, by adding 2% Aqua VGA-485 (isocyanate-free)
The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.
Wood moisture content: 8-12%
MDF boards: bulk density >= 700 kg/m³
Wash off greasy or resin-rich woods/substrates with WV-891 or V-890. Use UN-894 indoors on the construction site. Ensure good ventilation for solvents.
Sand wood using P 100 - 180 grit.
Sand panels using P 180 - 320 grit.
Stir well, including during application or after a break in work.
Flow cup gun: nozzle size: 2.0 - 2.5 mm; atomiser air pressure: 2.0 - 3.0 bar.
Airmix spraying: nozzle size: 0.23 - 0.28 mm, material pressure: 80 - 100 bar, atomiser air pressure: 1.2 - 2 bar.
Airless spraying: nozzle size: 0.23 - 0.28 mm, material pressure: 80 - 120 bar.
Use a coarse push-in filter for dull matt and textured products.
After drying and intermediate sanding (P 240 - 320), apply a second coat of the product.
Repeat the process if necessary.
Intensive colours, such as yellow, red, etc. may have a lower hiding power due to their pigments. Apply an additional coat if required.
Seal opened containers well and use contents as soon as possible.
Check colour, adhesion and compatibility with the substrate by setting up a trial area.
Before coating technically modified woods and wood-based materials, apply the coating to a trial surface and conduct a suitability test on the desired area of use.
The ring resistance and the tendency of the surface to shine up under mechanical stress are strongly dependent on the gloss level selected: higher gloss levels are generally more robust here than extremely matt finishes. In the case of increased, constant stress, a clear coating may therefore be advisable.
To ensure optimum resistance to metal rings and to improve the resistance to chemicals, we recommend coating with a suitable, light-fast clear varnish.
When coating surfaces finished with a coloured varnish, add 5-10% of the Aqua colour varnish to the clear varnish in order to counteract changes in the colour shade.
Dust-dry: after approx. 1 hour
Ready for overcoating: after approx. 3-4 hours
Practice values at +20 °C and 65% relative humidity.
Low temperatures, poor ventilation and high humidity delay drying.
Ready to use; dilute with 2-5% water if necessary.
Working tools / cleaning
Airless/Airmix spraying equipment, flow cup gun
Airless/airmix spraying equipment, flow cup gun
Clean tools with water or Aqua RK-898 Cleaning Concentrate immediately after use.
Ensure that any residue from cleaning is disposed of correctly.
Storage / shelf life
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
150-200 ml/m² per coat, min. 2 coats
DIN EN 71-3 "Migration of certain elements":
This product complies with the limits for the migration of heavy metals to children's toys according to DIN EN 71-3 and thus fulfils one of several further requirements for the safety of children's toys according to the EU "Toy Directive" (2009/48/EC).
To preserve the quality of the surface, we recommend regular cleaning and care using a lint-free cotton cloth. Please use solvent-free and silicone-free cleaning agents.
Please refer to the relevant test reports/certificates and the Technical Data Sheet for information on certified products and configurations.
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
Safety / regulations
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.