Article No. 194120
Highly matt 2K PUR lacquer with anti-fingerprint effect – including on dark substrates
![](https://m.remmers.com/guetezeichen/84928.png?w=100)
![](https://m.remmers.com/guetezeichen/101456.png?w=100&version=1)
Product specifications
On delivery
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Primer & top coat
- Solid wood & veneers
- High-quality furniture
- Kitchen and bathroom furniture
- Handleless front panels
- Dark and dark-stained wood
- Topcoat on coloured varnishes (resistance to metal rings, gloss level)
Properties
- Quick-drying
- Good sanding properties
- Excellent resistance to chemicals
- Good scratch resistance
- Does not become glossy
- Lightfast
- High transparency
- Fire behaviour according to DIN EN 13501-1: C-s1,d0 on suitable substrates
- Anti-fingerprint effect
-
Preparation
-
Substrate requirements
The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.
Wood moisture content: 8-12%
-
Preparations
Wash off greasy or resin-rich woods/substrates with WV-891 or V-890. Use UN-894 indoors on the construction site. Ensure good ventilation for solvents.
Softwoods: sand with P 80 - 120.
All other substrates: sand with P 180 - 320.
-
-
Application
-
Spray.
Flow cup gun: nozzle size: 1.8 - 2.0 mm; atomiser air pressure: 2 - 3 bar.
Airless spraying: nozzle size: 0.23 - 0.28 mm, material pressure: 80 - 120 bar.
Airmix spraying: nozzle size: 0.23 - 0.28 mm, material pressure: 80 - 100 bar, atomiser air pressure: 1.2 - 2 bar.
After drying and intermediate sanding (P 240 - 320), apply a second coat of the product.
Repeat the process if necessary.
When using as a topcoat, one application is sufficient.
Seal opened containers well and use contents as soon as possible.
-
Application instructions
-
Check colour, adhesion and compatibility with the substrate by setting up a trial area.
Before coating technically modified woods and wood-based materials, apply the product to a trial surface and conduct a suitability test on the desired area of use.
When coating surfaces that have been treated with a coloured varnish, max. 5% of the coloured varnish can be added to the product to counteract colour changes (lightening of the varnish).
On dark substrates in particular, we recommend a finely atomised and uniform coating using a flow cup gun in a cross-coating process. Differing parameters should be discussed in advance with Remmers Technical Service and the product should be tested out on a trial area first.
The time period during which the product can be overcoated without the need for intermediate sanding is based on the information under "Overcoating" (drying time). Once this time period has been exceeded, the surface must be sanded and dusted off immediately prior to further coats.
Use breathable materials when packing the coated wood building elements.
-
Drying
Practice values at +20 °C and 65% relative humidity.
Low temperatures, poor ventilation and high humidity delay drying.
-
Working tools / cleaning
-
Airless/airmix spraying equipment, flow cup gun
Clean tools using WV-891 Brush Wash or V-890 Thinner.
Ensure that any residue from cleaning is disposed of correctly.
-
Storage / shelf life
-
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 24 months.
-
Usage
-
80 - 120 ml/m² per coat
-
General information
-
DIN EN 71-3 "Migration of certain elements":
This product complies with the limits for the migration of heavy metals to children's toys according to DIN EN 71-3 and thus fulfils one of several further requirements for the safety of children's toys according to the EU "Toy Directive" (2009/48/EC).To preserve the quality of the surface, we recommend regular cleaning and care using a lint-free cotton cloth. Please use solvent-free and silicone-free cleaning agents.
Please refer to the relevant test reports/certificates and the Technical Data Sheet for information on certified products and configurations.
-
-
Disposal instructions
-
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-