Aqua KWP-841 Lime-Based Pigment Paste

The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.

Wood moisture content: 8-12%

Brush the pores.

Create texture on softwoods.

If PUR or Aqua coatings are being used on top of a coloured substrate, then stain with Aqua KB-004, Aqua BB-007 or Aqua PB-006. After this step, prime the entire surface thoroughly using the desired coating system.

If using HWS-112 as a sealant on top of a coloured substrate, stain using OB-008, then prime with HWS-112.

Stir well.

Apply with a brush, roller or by spraying.

Flow cup gun: nozzle size: 2.0 - 2.5 mm; atomiser air pressure: 2.0 - 3.0 bar.

Smooth or wipe on.

Once dry, remove excess by sanding with P240-320 grit.

Seal with a suitable system product.

Seal opened containers well and use contents as soon as possible.

Check colour, adhesion and compatibility with the substrate by setting up a trial area.

Practice values at +20 °C and 65% relative humidity.

Low temperatures, poor ventilation and high humidity delay drying.

Ready to use

Flow cup gun, lint-free cotton cloth, flexible scraper, sealant roller with microfibre covering, acrylic brush.

Clean tools with water or Aqua RK-898 Cleaning Concentrate immediately after use.

Ensure that any residue from cleaning is disposed of correctly.

If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

60 - 120 ml/m² depending on the desired effect

Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.