Article No. 264103
Special cleaner and brightener for use on wood in outdoor areas
Product specifications
On delivery
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Cleaning and brightening weathered exterior wood surfaces
- Terraces, fences, garden furniture and other building elements
Properties
- An effective way to remove dirt, greying, traces of rust, algae and moss
- No pre-sanding required
- In gel form
- Water-based
- Biodegradable
-
Preparation
-
Preparations
Sweep terraces using a coarse broom.
Brush down any other wood surfaces thoroughly.
If necessary, remove any leftover coatings with Wood Cleaner, taking care not to leave any residue.
Dampen the wood.
-
-
Application
-
Application requirements
Temperature of the material, air and substrate: from min. +5 °C to max. +25 °C
-
Use the special scrubbing brush, a surface brush or paintbrush to apply a generous, even layer of material to the entire area.
Leave the material to take effect for approx. 15 minutes.
Keep the treated area damp during this time.
Scrub down the wood in the direction of the grain/board by board using the special scrubbing brush.
Hose down the wood thoroughly.
Keep rinsing until no more foam forms. It may help to use a coarse broom to sweep away residual water.
No white product residue can be allowed to remain.
Repeat the process if dealing with heavily greyed substrates.
After leaving to dry for 1-2 days, re-treat using garden wood oils, maintenance oils or WPC impregnating oils.
Wood surfaces that have become heavily roughed up can be smoothed down in advance with sandpaper if necessary.
Seal opened containers well and use contents as soon as possible.
-
Application instructions
-
Always set up a trial area/trial areas first.
Rinse treated areas with plenty of water.
Try not to let any cleaning or rinsing water get into bodies of water or gardens. Protect them against direct contact using a sheet or tarpaulin where necessary.
Check colour, adhesion and compatibility with the substrate by setting up a trial area.
-
-
Working tools / cleaning
-
Special scrubbing brush, acrylic brush, flat brush
-
Clean tools immediately after use with water.
Ensure that any residue from cleaning is disposed of correctly.
-
Storage / shelf life
-
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 24 months.
-
Usage
-
Approx. 200 ml/m² in a single coat
-
Disposal instructions
-
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-