Silicone Remover

Mechanically remove coarse soiling.

Adjacent building elements and materials that are not intended to come into contact with the product should be protected using suitable measures.

Temperature of the material, air and substrate: from min. +5 °C to max. +30 °C

Shake the can vigorously before each use.

Use a brush to apply the product to the silicone residues.

Once the product has had sufficient time to act, use a suitable tool to carefully remove the loosened silicone residues.

Repeat the process if necessary.

Wash treated surfaces thoroughly with warm soapy water until no more white streaks form.

Test on an inconspicuous area before use to ensure compatibility.

Do not use on areas directly exposed to sunlight or on heated surfaces.

Brush

Clean tools immediately after use with V 101 Thinner.

If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

Dependent on level of contamination

Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.