Article No. 068412

    Power Protect First-Aid Gel

    Fungicidal gel for elimination of mould and immediate binding of spores

    0684 | Power Protect First-Aid Gel
    Size / Quantity

    Discontinued product This container size is being phased out and is only available to a limited extent.



    Safety instructions

    • Use biocides safely. Always read the label and product information before using!

    Product specifications

    On delivery

    Density (20°C) 0.86 g/ml
    Odour Alcohol
    Viscosity Gel-like

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use on floors/walls/ceilings indoors
    • Immediate binding of mould spores
    • Elimination of mould on mineral substrates and other alcohol-resistant substrates
    • Temporary health protection prior to mould remediation measures


    • Prevents spores from being emitted into the ambient air
    • Alcohol-based
    • Blocking effect until mould remediation can be carried out
    • Fast and independent action
    • Deep action
    • Preparation
      • Substrate requirements


      • Preparations

        If necessary, use a suitable device to vacuum off larger fruiting bodies.

    • Application
      • Application temperature: min. 5 °C max. 25 °C
      • Gun for sealing compounds
      • Application requirements

        Temperature of the material, air and substrate: from min. +5 °C to max. +25 °C

      • Using sufficient force, apply the material to the surface being treated.

        Apply material to the surface in a meandering, crosswise or linear motion.

        Create a homogeneous, bubble-free layer with a thickness of 1-2 mm above the contaminated region.

        Position a suitable dissipative film on top as tightly as possible and tape the edges with adhesive tape.

        Using a suitable tool, spread the material out evenly underneath the film.

    • Application instructions
      • Keep away from sources of ignition, protect against electrostatic charges.

        Use to a distance of approx. 20 cm beyond the visibly contaminated area.

    • Working tools / cleaning
      • Gun for sealing compounds
      • Manual, compressed-air or electric cartridge gun, wallpaper brush, wallpaper scraper, roller or smoother

      • Clean tools immediately after use with water.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • If stored in unopened original containers in a cool, dry place protected from frost and direct sunlight in a well ventilated area, the shelf life is at least 36 months. Keep out of the reach of children. Do not smoke in areas where the product is stored.

    • Usage
      • Approx. 2000 ml/m²

    • General information
      • After application, the Power Protect First-Aid Gel slowly releases isopropanol. Since isopropanol is a potentially flammable substance, explosive alcohol-air mixtures may form in unfavourable environments. For this reason, ignition sources must be avoided and the room containing the treated components must be ventilated thoroughly.

        Keep away from sources of ignition, protect against electrostatic charges.

        Mould remediation measures must be carried out after a maximum of 14 days. Alternatively, re-treat the surface.

        After a maximum of 14 days, remove the film and dispose of it properly.

        Make sure that any material residues that have not dried are disposed of properly.

        Do not heat cartridge above +35 °C.

        Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.

        The relevant test certificates must be observed when planning and carrying out work.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

        European waste code 07 04 04* other organic solvents, washing liquids and mother liquors

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.