Article No. 016401
Wedge-shaped interior insulation panel in the iQ-Therm 2.0 system
Downloads & documents
Product specifications
On delivery
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Energy efficiency upgrades
- Mould control and prevention in existing buildings
- Implementation of the hygienic minimum heat insulation level in existing buildings
- Improving the room climate by increasing the wall surface temperature
- Compensation of thermal bridging effects in ceiling and wall connection areas
- Optical correction of butt joints
Properties
- Excellent thermal insulation
- Thermal conductivity (nominal value) approx. 0.028 W/(m•K)
- Low construction height
- Easy to apply
- Thermal insulation material according to DIN 4108-10
-
Preparation
-
Substrate requirements
The substrate must be load-bearing, even, clean, dry and free from adhesion-reducing substances.
-
Preparations
Level off and even out highly uneven substrates – use SP Level to close up joints and even out surfaces.
-
-
Application
-
Pre-wet the substrate.
Apply iQ M universal to the substrate as a scratch coat.
Use a notched trowel to apply iQ M universal wet-on-wet to the back of the wedge and the substrate.
Position and press on the boards from the bottom up.
Align using a floating rule.
-
-
Application instructions
-
Mark the desired dimensions on the board.
Cut to size using a cutter knife.
Rework the cut edges with a rasp or file if necessary.
Avoid cross joints.
Align using a floating rule.
Make sure that full-surface bonding is achieved.
-
-
Working tools / cleaning
-
Cutter knife
-
-
Storage / shelf life
-
Dry and frost-free.
-
-
Usage
-
Approx. 1.4 panels/m²
-
-
General information
-
Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.
-
