Article No. 094910


    Polymer-modified thixotropic agent

    0949 | ADD TX NEW
    Size / Quantity

    Product specifications

    On delivery

    Density 0.96 g/cm³
    Form Fibres

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • Thixotropic agent for epoxy resin and polyurethane systems


    • Generates very little dust
    • Easy to portion out
    • Easy to mix in
    • Application
      • The dispensing procedure must be adapted on site depending on the material and application quantity.

        Use, degree of filling and working directions are determined by the specific application and the resin/hardener system used.

    • Storage / shelf life
      • Protect form moisture
      • Unlimited if stored dry.

    • Usage
      • Depending on application and binder base, approx. 0.3 - 3% by mass based on the binder

    • General information
      • The amount of thixotropic agent used depends on the temperature of the material and air, and the method of incorporation.

        Thixotropising influences the material properties.

        Further notes on working, system construction and maintenance of the listed products can be found in the latest Technical Data Sheets and the Remmers system recommendations.

    • Safety / regulations
      • For professional users only!

        Further information concerning safety during transport, storage and handling as well as on disposal and ecology can be found in the latest Safety Data Sheet.