Article No. 109984
Organic solvent mixture for removing fresh PU foam and adhesive residues
Product specifications
On delivery
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Removing fresh residues of foam and adhesive
- Cleaning guns, nozzles, valves & tools
Properties
- Quick, thorough removal of fresh PU foam and adhesive residues
-
Preparation
-
Preparations
Position NBS gun.
-
-
Application
-
Use the material according to the applicable regulations.
-
-
Application instructions
-
Always use immediately while the foam is wet, because hardened foam can only be removed mechanically.
-
Drying
Flash-off time: approx. 5 minutes (+20 °C)
-
-
Working tools / cleaning
-
NBS gun
-
-
Storage / shelf life
-
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
-
-
Usage
-
Depending on contamination and foam quantity
-
Apply to a large enough trial area to determine the precise amount required.
-
-
General information
-
The applicable regulations and legal requirements must be observed.
The relevant test certificates must be observed when planning and carrying out work.
The solvents contained in the foam cleaner may attack varnishes, paints and plastics.
Always set up a trial area/trial areas first.
Use only outdoors or in a well-ventilated area.
Do not heat can to above +50 °C.
-
-
Disposal instructions
-
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-
