Article No. 158612
1-component moisture-hardening PU foam for insulating, bonding & filling
Product specifications
On delivery
Once fully cured
Once fully cured
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- General assembly and sealing work during interior construction (building material class B2 according to DIN 4102)
- Assembly of door and window frames
- Filling and waterproofing cavities and joints
- Bonding insulation material, masonry, wood, sheet metal and various plastics
Properties
- Specially designed for application without guns
- High foam yield
- Excellent isolation, sound and heat insulation
- Rot-proof
- Resistant to soft rot
- Resistant to water, oil, petrol, alkalis and various solvents
-
Preparation
-
Substrate requirements
The substrate must be free from dirt, dust, loose parts, oil and grease deposits.
-
Preparations
Thoroughly moisten the substrate.
Shake the can vigorously before each use.
Position the angled adapter.
-
-
Application
-
Use the material according to the applicable regulations.
-
-
Application instructions
-
Do not use on fire doors.
-
-
Working tools / cleaning
-
Hardened foam is insoluble.
Remove impurities immediately with foam cleaner.
-
-
Storage / shelf life
-
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
-
-
Usage
-
Dependent on application
Yield: for 500 ml: approx. 15 l/can (free-foaming) -
Apply to a large enough trial area to determine the precise amount required.
-
-
General information
-
Always set up a trial area/trial areas first.
Do not heat can to above +50 °C.
The applicable regulations and legal requirements must be observed.
The relevant test certificates must be observed when planning and carrying out work.
-
-
Disposal instructions
-
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-
