• Historic Spritzbewurf

    Article No. 057420

    CL Prep Historic

    Specially formulated rough cast

    0574 | CL Prep Historic
    Size / Quantity

    Discontinued product This container size is being phased out and is only available to a limited extent.

    Product specifications

    On delivery

    Compressive strength Dependent on building
    Water requirement Dependent on formulation

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use indoors and outdoors
    • Substrate preparation before applying Remmers Historic renders
    • Equalising differences in the absorption properties of the substrate


    • Reproduction of the original state in accordance with monument preservation targets
    • Specially adapted binder
    • Specially adapted grain size distribution
    • Preparation
      • Substrate requirements

        Clean, dust-free and capable of supporting a load.

      • Preparations

        Pre-wet the substrate so that it is slightly moist.

    • Application
      • Application temperature: min. 5 °C max. 30 °C
      • Application requirements

        Temperature of the material, air and substrate: min. +5 °C to max. +30 °C

      • Throw on the mixed mortar in clumps (max. 5 mm).

        Do not use the material to level out uneven surfaces.


    • Application instructions
      • Once it has hardened, mortar must not be made workable again by adding either water or more wet mortar.

        Protect wet mortar surfaces against frost, rain and drying out too quickly for at least 4 days.

        Leave to harden for at least 3 days before applying subsequent layers of render.

        Since the material is formulated for a specific object, application by machine cannot be guaranteed.

    • Working tools / cleaning
      • Mixing tool, spray plasterer, aluminium float, Berlin bricklayer's trowel, Bernese style trowel

        Clean tools with water while the material is still fresh.

    • Storage / shelf life
      • Protect form moisture
      • Shelf-life 12 months
      • If stored in an unopened container and in a dry place, the product will keep for approx. 12 months.

    • Usage
      • Depending on object and formulation / m²
      • Dependent on building and formulation

      • Apply to a large enough trial area to determine the precise amount required.

    • General information
      • The mixing water must be of drinking water quality.

        May contain traces of pyrite (iron sulphide).

        Do not use on gypsum-based substrates.

        Low chromate content in accordance with Directive 2003/53/EC.

        The characteristic data of the product were calculated under laboratory conditions at 20°C and 65% relative humidity.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.