• Induline Mix & Go

    Article No. 182701

    Induline Mix & Go

    For producing a brushing quality from spraying quality using Induline Mix & Go brushing additive

    Variant
    1827 | Induline Mix & Go
    Size / Quantity

    Product specifications

    On delivery

    Density (20°C) 1.02
    Odour Mild

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use indoors and outdoors
    • for exterior doors
    • For professional users only
    • For use on interior and exterior wood
    • Dimensionally stable wood building elements: e.g. windows and doors
    • Repair of paintwork damage that occurs during transportation and installation of wood elements
    • Maintenance of weathered surfaces

    Properties

    • Water-based
    • High flexibility: achieve gloss level and colour with individual brushing quality from spraying quality
    • Easy to apply
    • Low odour
    • Good flow properties
    • Block resistant (in accordance with Code of Practice HO.03)
    • Weatherproof and moisture-regulating
    • Highly elastic
    • Preparation
      • Substrate requirements

        The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.

        Dimensionally stable wood building elements: wood moisture content 11-15%

      • Preparations

        Carry out intermediate sanding before applying a final coat: P 220-240, remove sanding dust.

        Observe BFS Code of Practice No. 18 "Coatings on Wood and Wooden Working Materials in Outdoor Areas".

    • Application
      • Application temperature: min. 10 °C max. 25 °C
      • Stir before use
      • By brush / By roller
      • Application requirements

        Temperature of the object, air and material: 10 - 25 °C
        Do not use in direct sunlight
        Do not use in damp, foggy or rainy conditions
        Protect freshly treated surfaces against dust, dirt etc.

      • Stir well.

        Apply using a brush or roller.

        Seal opened containers well and use contents as soon as possible.

    • Application instructions
      • Drying time: can be worked over after 4-6 h
      • Check colour, adhesion and compatibility with the substrate by setting up a trial area.

        Areas that are being coated or dried should be protected against rain, wind, sunlight and condensation.

        Use suitable adhesive tape (e.g. tesa® Maler-Krepp Precision Outdoor 56251) to mask all surfaces that are not to be coated.

        Make sure that there is no streaking.

        Any adhesive tape used must be carefully removed from the substrate after around 30 minutes.

        Using a short-pile roller (Storch Art. No. 148918 is especially suitable), apply the lacquer evenly in strips from one window corner to another, or in continuous lengths for other components.

        Plan your work in such a way that the entire application process can be completed within five minutes.

      • Drying

        Dust-dry: after approx. 1 hour
        Ready for gentle use: after approx. 4-6 hours
        Fully hardened: after approx. 48 hours

        Practice values at +20 °C and 65% relative humidity.

        The coating may take significantly longer to dry thoroughly in lower temperatures, at high humidity or if the maximum layer thickness has been exceeded.

    • Working tools / cleaning
      • By brush / By roller
      • Acrylic brush, microfibre paint roller

      • Clean tools immediately after use with water and detergent.

        Ensure that any residue from cleaning is disposed of correctly.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • Shelf-life 24 months
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 24 months.

    • Usage
      • Approx. 80 ml / m² per layer applied
      • Approx. 80 ml/m² per coat

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.