Article No. 299005
Solvent-free and plasticiser-free special primer for binding mould spores
Product specifications
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Binding mould spores before removing contaminated surfaces
- Reducing the levels of dust contaminated with mould spores
Properties
- Complexes and binds
- Reduces the level of mould spores in the air
- Free from solvents and plasticizers
- Water-dilutable
-
Application
-
Carefully coat the contaminated material with the diluted product (do not spray on).
-
-
Application instructions
-
Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product.
-
-
Working tools / cleaning
-
Clean tools with water while the material is still fresh.
Remove splashes with water while still wet.
-
-
Storage / shelf life
-
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
-
-
Usage
-
Apply to a large enough trial area to determine the precise amount required.
-
-
General information
-
The applicable regulations and legal requirements must be observed.
The relevant test certificates must be observed when planning and carrying out work.
Always set up a trial area/trial areas first.
-
-
Disposal instructions
-
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-
