• MB PUReactive P-1

    Article No. 415001

    MB PUReactive P-1

    1K primer for plastic and elastomer sheets

    Variant
    4150 | MB PUReactive P-1
    Size / Quantity

    Brochures

    product.brochures.loading

    Product specifications

    On delivery

    Colour slightly yellowish
    Consistency liquid
    Specific weight 0.75 g/cm³

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For professional users only
    • Primer for plastic and elastomer sheets

    Properties

    • Ready to use
    • Can be overcoated after 15 minutes
    • Quick-drying
    • Optimum adhesion on a wide range of substrates
    • Good self-adhesion
    • Preparation
      • Substrate requirements

        The substrate must be level, clean, dust-free and stable, and free of oil, grease and release agents.

      • Preparations

        Clean substrate with Thinner V103.

    • Application
      • Application temperature: min. 5 °C max. 40 °C
      • Brush
      • Apply the material using a suitable tool.

        Subsequent application of the liquid waterproofing must take place within the specified time frame.

        If kept in storage for long periods, or if dirt accumulates in the meantime, clean and prime surfaces again.

    • Application instructions
      • A suitability and compatibility test must always be conducted on unknown materials.

    • Working tools / cleaning
      • Brush
      • Paintbrush

      • Clean tools immediately after use with V 103.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • Shelf-life 12 months
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • 75 ml per layer applied / m²
      • Approx. 75 ml/m²

    • General information
      • The applicable regulations and legal requirements must be observed.

        The relevant test certificates must be observed when planning and carrying out work.

        Always set up a trial area/trial areas first.

        Use only outdoors or in a well-ventilated area.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.