Article No. 300801
Special primer
Product specifications
On delivery
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- System component for waterproofing of buildings
- Suitable for absorbent mineral substrates
Properties
- Improves adhesion
- Repels water
- Strengthens
-
Preparation
-
Substrate requirements
The substrate must be dry, clean, load-bearing and free of dust.
-
-
Application
-
Apply evenly to the material using a brush, roller or spray.
Make sure that no pools form.
-
-
Working tools / cleaning
-
Broad and narrow brushes, flat brush, lambskin roller, spraying equipment
-
Clean tools, equipment and any splashed material immediately with water while still fresh.
Ensure that any residue from cleaning is disposed of correctly.
-
-
Storage / shelf life
-
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
-
-
Usage
-
Approx. 100 - 200 ml/m² depending on the substrate
-
Apply to a large enough trial area to determine the precise amount required.
-
-
General information
-
Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.
The relevant test certificates must be observed when planning and carrying out work.
-
-
Disposal instructions
-
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-
