• Betofix RM

    Article No. 109225

    Betofix RM

    Fast repair mortar PCC (RM) for repairing concrete structures

    Variant
    1092 | grey
    Size / Quantity

    Product specifications

    On delivery

    Compressive strength 3 hours: approx. 3 N/mm²
    24 hours: approx. 6 N/mm²
    28 days: > 10 N/mm²
    Bulk density of fresh mortar Approx. 1.7 kg/dm³
    Maximum grain size 0.5 mm
    Capillary water uptake ≤ 0.5 kg/(m²h0.5)
    Consistency of the mixture For filling
    Water requirement Approx. 4.8 - 5.3 l/25 kg
    Surface tensile strength > 0.8 N/mm²

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use on walls/ceilings indoors and outdoors
    • Concrete replacement according to
      - DIN EN 1504-3
      - Rili-SIB DAfStb 2001
    • Concrete replacement for non-structurally relevant repairs
    • Repair of pores, missing and broken out areas

    Properties

    • Early strength
    • Very low shrinkage
    • Well suited to overhead working
    • Can be applied by spatula and felted
    • Freeze/thaw-resistant
    • Preparation
      • Preparations

        Concrete surface:
        Stable, clean, dust-free
        Observe the applicable technical regulations for the following parameters:
        - Adhesive pull strength of the substrate
        - Minimum roughness/roughness depth

        Pre-wet the substrate so that it is slightly moist.

        Reinforcement:
        Degree of purity SA 2 ½ if applying corrosion protection, otherwise SA 2

    • Application
      • Application temperature: min. 5 °C max. 25 °C
      • Mortar cover / Filling knife / Trowel application
      • Drying time: can be worked over after 20 minutes
      • Working time
        (+20 °C): approx. 20 minutes

         

        Layer thickness

        Single layer 1.5 - 10 mm
        Two layers < 20 mm, apply wet-on-wet
        In broken-out areas < 100 mm

         

        Applying corrosion protection:

        Apply two layers of slurry with a thickness of min. 1 mm each, making sure the entire surface is covered.

        Waiting time between layers: approx. 30 minutes.

         

        Subsequent processing

        Protect fresh mortar surfaces from wind, direct sunlight, rain and/or frost for at least 3 days so that they do not dry too quickly.

         

    • Working tools / cleaning
      • Mortar cover / Filling knife / Trowel application
      • Mixing tool, paintbrush, filling knife, trowel, smoothing trowel, sponge float, plasterer’s float

        Clean tools with water while the material is still fresh.

    • Storage / shelf life
      • Protect form moisture
      • Shelf-life 12 months
      • If stored in an unopened container and in a dry place, the product will keep for approx. 12 months.

    • Usage
      • 1.2 kg / mm thick layer / m²
      • Approx. 1.2 kg/m²/mm layer thickness, or 1.2 kg/dm³

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.