RM AC

The joint flanks must be load-bearing, as dry as possible, clean and free of dust and grease

Sanded joint sides can lead to lateral detachment.

Priming, always immediately before mortar application

Sandstone: 1 : 14, AC LQ : water

Granite and smooth-sawn surfaces: 1 : 2, AC LQ : water

Layer thickness, single layer, max. 1 cm

The mortar can be stirred multiple times within the processing time period.

For multi-layer structures, apply primer before every new layer.

Wait until fully dry before applying the next layer.

Once the mortar has set, the surface can be further processed by dry sanding.

Slight deviations in colour between different batches are possible.

Fresh mortar surfaces must be protected from frost and rain for at least 4 days.

The type of surface processing has an impact on the colour.

Do not re-wet joints.

Mixing tool, smoothing trowel, jointing iron

Clean tools and equipment with water before the mortar sets.

At least 36 months in unopened, original containers stored cool, dry and protected from frost.

Approx. 1.8 kg/l joint space

Apply to a large enough trial area to determine the precise amount required.

The characteristic data of the product were calculated under laboratory conditions at 20°C and 65% relative humidity.

Always set up a trial area/trial areas first.

Acrylic-bonded mortars are reversible. Product can be removed again by treatment with special solvents.

Do not use in permanently wet areas.

Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.