• WPC Impregnation Oil

    Article No. 208701

    WPC Impregnation Oil

    Solvent-based oil for terraces, fences and other building elements made of WPC, Resysta and bamboo

    Colour: clear | 2087
    Colour: clear | 2087
    Please choose a colour
    Size / Quantity

    Product specifications

    On delivery

    Binder Alkyd resin
    Density Approx. 0.80 g/cm³
    Odour Solvent-like

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use indoors and outdoors
    • for elements with limited dimensional stability
    • for not dimensionally stable elements
    • for wood garden furniture
    • Interior and exterior use
    • Wood building elements with limited dimensional stability, e.g. folding shutters, matchboarding, summerhouses
    • Wood building elements with no dimensional stability: e.g. fences, framework, carports, planking
    • Terraces, fences, garden furniture and other building elements
    • Wood-plastic composites
    • WPC (wood-plastic composites), Resysta and bamboo

    Properties

    • Solvent-based
    • Repels water
    • Repels oil, grease and dirt
    • Easy to apply
    • Clear: for refreshing colour
    • Brown and grey: for lasting intensification of the original colour
    • Subsequent treatment without sanding
    • Preparation
      • Substrate requirements

        Material for treating surfaces that have already been exposed to weathering.

        The substrate must be dry and free of dust, dirt, grease and wax.

      • Preparations

        If necessary, pre-treat WPC with Wood Cleaner.

        Remove algae with Green Growth Remover*. (*Use biocides safely. Always read the label and product information before use.)

        Pre-treat bamboo with Green Growth Remover*. (*Use biocides safely. Always read the label and product information before use.)

    • Application
      • Brush
      • Stir before use
      • Application temperature: min. 5 °C max. 30 °C
      • Application requirements

        Temperature of the material, air and substrate: from min. +5 °C to max. +30 °C

      • Apply by brush.

        Stir well.

        Apply the material using a varnish brush, surface brush or cloth (cotton).

        Take up any excess material with a dry brush or cloth after a maximum of 30 minutes.

        After 4-6 hours, inspect the surface and apply a second coat if necessary.

        Seal opened containers well and use contents as soon as possible.

    • Application instructions
      • Drying time: can be worked over after 4-6 h
      • Check colour, adhesion and compatibility with the substrate by setting up a trial area.

        Over the course of several months, WPC Impregnation Oil will be evenly broken down due to weathering. Subsequent application of WPC Impregnation Oil can then be carried out without prior sanding.

        Reapplications are required at least once a year in areas exposed to weathering.

         

        Risk of self-ignition (DGUV information brochure 209-046).

        The product should not be applied at the same work stand as NC-based varnishes or stains. Collect any textiles soiled with the product (e.g. cleaning rags, work clothing) in fire-resistant waste containers and dispose of properly.

      • Drying

        Can be overcoated: after approx. 4 - 6 hours

        Practice values at +20 °C and 65% relative humidity.

        Low temperatures, poor ventilation and high humidity delay drying.

      • Thinning

        Ready to use

    • Working tools / cleaning
      • Brush
      • Paintbrush with natural bristles, flat brush, lint-free cotton cloth

      • Clean tools immediately after use with thinner and brush cleaner.

        Ensure that any residue from cleaning is disposed of correctly.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 5 years.

    • Usage
      • Approx. 50 g / m² per layer applied
      • Approx. 50 ml/m² per coat depending on the absorption capacity of the substrate

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.