• 0000321001 AQUA KWP 841

    Article No. 321001

    3210 Aqua KWP-841 Lime-Based Pigment Paste

    Water-based pigment preparation for creating decorative effects on wood

    Product specifications

    On delivery

    Density (20°C) Approx. 1.13 g/cm³

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use indoors
    • for stairs
    • for wood floors
    • for interior doors
    • for furniture
    • For professional users only
    • Interior wood
    • Furniture and interior finishing work
    • Wooden floors and stairs
    • Textured softwoods
    • Large-pored woods such as oak or ash

    Properties

    • Water-based
    • Ready to use
    • Intense colour
    • Mild odour
    • Long open time for streak-free application (on large surfaces)
    • Fast drying
    • Easy to sand off
    • Preparation
      • Substrate requirements

        The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.

        Wood moisture content: 8-12%

      • Preparations

        Brush the pores.

        Create texture on softwoods.

        If PUR or Aqua coatings are being used on top of a coloured substrate, then stain with Aqua KB-004, Aqua BB-007 or Aqua PB-006. After this step, prime the entire surface thoroughly using the desired coating system.

        If using HWS-112 as a sealant on top of a coloured substrate, stain using OB-008, then prime with HWS-112.

    • Application
      • Stir before use
      • By brush/By roller/Flow cup gun
      • Non-fuzzing cotton cloth
      • Application temperature: min. 18 °C max. 25 °C
      • Filling knife
      • Application requirements

        Temperature of the material, air and substrate: from min. +18 °C to max. +25 °C.

      • Stir well.

        Apply with a brush, roller or by spraying.

        Flow cup gun: nozzle size: 2.0 - 2.5 mm; atomiser air pressure: 2.0 - 3.0 bar.

        Smooth or wipe on.

        Once dry, remove excess by sanding with P240-320 grit.

        Seal with a suitable system product.

        Seal opened containers well and use contents as soon as possible.

    • Application instructions
      • Drying time: can be worked over after 1 h
      • Check colour, adhesion and compatibility with the substrate by setting up a trial area.

      • Drying

        Ready for next coat: after approx. 1 hour

        Practice values at +20 °C and 65% relative humidity.

        Low temperatures, poor ventilation and high humidity delay drying.

      • Thinning

        Ready to use

    • Working tools / cleaning
      • By brush/By roller/Flow cup gun
      • Non-fuzzing cotton cloth
      • Filling knife
      • Flow cup gun, lint-free cotton cloth, flexible scraper, sealant roller with microfibre covering, acrylic brush.

      • Clean tools with water or Aqua RK-898 Cleaning Concentrate immediately after use.

        Ensure that any residue from cleaning is disposed of correctly.

    • Storage / shelf life
      • Shelf-life 12 months
      • Store frost-free and cool / protect for moisture / close containers
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • Approx. 60 ml - 120 ml / m² per layer applied
      • Approx. 60 - 120 ml/m² depending on the desired effect

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.