Article No. 196105
Light-fast, two-component topcoat for flame-resistant high gloss coatings
Downloads & documents
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Finishing coat
- Solid wood & veneers
- High-quality furniture
- Kitchen and bathroom furniture
- Shop fitting and trade fair stands
- Topcoat on coloured varnishes (resistance to metal rings, gloss level)
- Can be polished once cured
- Good flow properties
- Fire resistant
Wood moisture content: 8-12%
Pre-treat the substrate with a suitable system product.
Intermediate sanding: P 400 - P 800.
The coating should be applied directly after sanding.
Flow cup gun: nozzle size: 1.6 - 1.8 mm; atomiser air pressure: 2 - 3 bar.
Airless spraying: nozzle size: 0.23 - 0.28 mm, material pressure: 80 - 120 bar.
Airmix spraying: nozzle size: 0.23 - 0.28 mm, material pressure: 80 - 100 bar, atomiser air pressure: 1.2 - 2 bar.
If necessary, apply a second coat of the product after drying and intermediate sanding (P 320 - 600).
The coating may be applied wet-on-wet.
Seal opened containers well and use contents as soon as possible.
Check colour, adhesion and compatibility with the substrate by setting up a trial area.
Dust-dry: after approx. 20 - 30 minutes Overcoating: after approx. 1 hour
Practice values at +20 °C and 65% relative humidity.
Low temperatures, poor ventilation and high humidity delay drying.
Working tools / cleaning
Airless/airmix spraying equipment, flow cup gun
Clean tools using WV-891 Brush Wash or V-890 Thinner.
Ensure that any residue from cleaning is disposed of correctly.
Storage / shelf life
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 24 months.
120 - 150 ml/m² per coat
Please refer to the relevant test reports/certificates and the Technical Data Sheet for information on certified products and configurations.
To preserve the quality of the surface, we recommend regular cleaning and care using a lint-free cotton cloth. Please use solvent-free and silicone-free cleaning agents.
Safety / regulations