Article No. 264003
Special cleaner for weathered outdoor wooden decking with decorative coatings.
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Wooden decking
- Removal of coating residues (oils and thin-layer stains)
- Effective removal of residual oils and thin-layer stains from wooden decking
- No more pre-sanding of surfaces required
- Special brushes can be screwed on to a standard telescopic handle using a screw thread
Temperature of the material, air and substrate: from min. +15 °C to max. +25 °C.
Use the special scrubbing brush, a surface brush or paintbrush to apply a generous, even layer of material to the entire area.
Leave the material to take effect for approx. 30 minutes.
Spray lightly with water using a surface sprayer (4040 or 4041) to activate the cleaning agent.
Scrub down the wood in the direction of the grain/board by board using the special scrubbing brush.
Brush any recesses using the special brush for decking grooves.
Re-spray and re-brush as required.
If necessary, particularly stubborn coating residues can be removed using a metallic scraper when wet.
Hose down the wood thoroughly.
Keep rinsing until no more foam forms. It may help to use a coarse broom to sweep away residual water.
Assess the cleaned surface once it has dried and repeat the cleaning process if needed.
Where necessary, we recommend using Wood Revitalizer.
Seal opened containers well and use contents as soon as possible.
Rinse treated areas with plenty of water.
Do not let any rinsing water get into bodies of water.
If necessary, use tarpaulins or sheeting to protect against the product coming into direct contact with any adjacent crops, plants or building elements.
Working tools / cleaning
Special scrubbing brush, surface brush, paintbrush.
Clean tools immediately after use with water and detergent.
Ensure that any residue from cleaning is disposed of correctly.
Storage / shelf life
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
Approx. 200 ml/m² in a single coat
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
Safety / regulations
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.