©

Car park systems

Surface protection systems with great functionality, design and safety in mind

Sustainable solutions on all levels

Today’s car parks must be extremely durable and robust so that their use is guaranteed for many years. Due to the daily exposure, car park and parking deck surfaces are subject to heavy, thermal and chemical loads which wear out and eventaully become damaged or destroyed over time. The loads are caused by, among other things, the penetration of water and, in winter, de-icing salts. In addition, the vehicles also increase the CO₂ concentration due to their exhaust gases. When concretes surfaces are driven over, vibrations are created leading to fine cracks. This allows pollutants to penetrate more easily and create faster damage to the reinforcement steel and concrete.

We supply tested and long-standing, proven surface protection systems for this extreme usage. Remmer systems are not just used in new construction buildings, but also for restoration and repair projects where they are often the most sustainable solution for protecting the concrete structure. That is why we not only offer our certified products, but we also support you with analysis and advice for your repair project so that the concept represents a sustainable solution on all levels.

National and international references verify the durability of the Remmers surface protection systems.

Coating as a sealing layer with high crack-bridging under protective and topcoat layers for walkable and drivable surfaces according to DAfStb, TL / TP-BEL-B3

Coating as a sealing layer with high crack-bridging under protective and topcoat layers for walkable and drivable surfaces according to DAfStb, TL / TP-BEL-B3

Coating with increased dynamic crack-bridging capacity for walkable and drivable surfaces according to DIN EN 1504-2 and DAfStb

Car park systems

15 products found
 

View:

Article No. 1160

Transparent priming and mortar resin

Article No. 6380

Water-based, pigmented, silk-gloss sealant

Article No. 6370

Water-based, pigmented, matt sealant

Article No. 6320

Water-based, pigmented levelling layer and base coat

Article No. 1224

Pigmented primer and base layer

Article No. 6191

Pigmented roll-on coating or topcoat

Article No. 6050

Primer in the systems Remmers Deck OS 10 and Deck OS 11a pro

Article No. 6051

Spray-on waterproofing

Article No. 6053

Flexible wearing layer

Article No. 6054

Pigmented polyaspartic sealant in the systems Remmers Deck OS 10 and OS 11a pro

Article No. 4406

Fire-dried quartz mix

Article No. 6826

Intermediate or wearing layer

Article No. 6055

Pigmented topcoat for OS 11 systems

Article No. 6056

Flexible wearing layer

Article No. 6062

Solvent-based adhesion promoter