• Color SF [basic]
  • Color SF [basic]
    • Color SF [basic]
    • Color SF [basic]

    Article No. 641505

    Color SF [basic]

    Silicone-resin-reinforced facade paint with film protection for surfaces prone to algae and fungi

    Colour: Color SF | 6415
    Colour: Color SF | 6415
    Please choose a colour
    Size / Quantity

    Brochures

    product.brochures.loading

    Product specifications

    On delivery

    Density (20°C) 1.59 g/ml
    pH value Approx. 8.5
    Pigmentation Lightfast, alkali-resistant oxide pigments
    Viscosity 3500 mPa∙s

    Once fully cured

    Once fully cured

    Colour White
    Degree of gloss Matt, mineral character
    Water vapour permeability
    (DIN EN ISO 7783-2)
    sd <0.14 m
    Water absorption coefficient
    (DIN EN 1062-3)
    w ≤ 0.1 kg/(m² ∙ h0.5)

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use outdoors
    • Porous, mineral building materials in outdoor areas
    • Load-bearing silicate, silicone and matt dispersion coatings
    • Synthetic resin renders

    Properties

    • Water-based
    • Highly water-repelling w ≤ 0.1 kg/(m² ∙ h0.5)
    • Highly water vapour diffusible sd ≤0.14 m
    • Low-stress
    • Matt, mineral character
    • Preparation
      • Substrate requirements

        Dry, clean, free of dust and cracks and capable of supporting a load.

        Free of salts known to be damaging to building materials.

      • Preparations

        Use Impregnation Primer to prime mineral substrates capable of supporting a load.

        Use Primer HF or Primer Hydro HF to prime any sanding, firmly adhering substrates.

        If necessary, adjust the texture using Silicone Resin Color LA Fill.

    • Application
      • By brush / By roller / Airless/airmix spraying
      • Application temperature: min. 5 °C max. 25 °C
      • Application requirements

        Temperature of material, surroundings and substrate: min. + 5 °C to max. + 25 °C

      • Stir well.

        Coat the surface using a suitable tool.

        Apply the material in 2 coats, depending on the condition of the substrate.

        Wait at least 6 hours between coats.

    • Application instructions
      • Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product.

        When coating continuous surfaces, only use materials with the same batch number.

        Intensive colours, such as yellow, red, etc. may have a lower hiding power due to their pigments. Apply an additional coat if required.

        Protect freshly treated surfaces from driving rain, wind, sunlight and condensation.

    • Working tools / cleaning
      • By brush / By roller / Airless/airmix spraying
      • Brush, whitewash brush, Lambswool roller and airless sprayer

      • Clean tools with water while the material is still fresh.

        Clean splashed material with water while the material is still fresh.

    • Storage / shelf life
      • Shelf-life 12 months
      • Store frost-free and cool / protect for moisture / close containers
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • 200-300 ml per layer applied / m²
      • Approx. 0,2 - 0.3 l/m² per application

      • 2 coats required.

        Application rates may vary depending on the condition of the surface.

        Apply to a large enough trial area to determine the precise amount required.

    • General information
      • Deviations from applicable regulations must be agreed separately.

        The relevant test certificates must be observed when planning and carrying out work.

        Always set up a trial area/trial areas first.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.