• 0000384001 Aqua KB 004
  • Aqua KB-004 Compact Stain
    • 0000384001 Aqua KB 004
    • Aqua KB-004 Compact Stain

    Article No. 384001

    Aqua KB-004 Compact Stain

    Water-based pigment stain for universal use

    Colour: clear | 3840
    Colour: clear | 3840
    Please choose a colour
    Size / Quantity

    Product specifications

    On delivery

    Binder Acrylic copolymer
    Density Approx. 1 - 1.2 g/cm³
    Odour Characteristic

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use indoors
    • for stairs
    • for interior doors
    • for furniture
    • For professional users only
    • Fine-pored woods such as beech, maple, cherry wood and walnut
    • Stain emphasises the pores (e.g. rustic effect on oak and ash)
    • Softwoods that are not to be given a positive staining effect


    • Water-based
    • Highly concentrated combination of pigments
    • Lightfast
    • Suitable for universal use
    • Colour intensity can be adjusted with water or with clear product
    • Undiluted – for highly intense wood colouring
    • Preparation
      • Substrate requirements

        The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.

        Wood moisture content: 8-12%

      • Preparations

        Sand the raw wood with P 120 - 180.

        Apply the stain immediately after sanding.

    • Application
      • Application temperature: min. 18 °C max. 25 °C
      • Stir before use
      • By brush / Flow cup gun
      • Application requirements

        Temperature of the material, air and substrate: from min. +18 °C to max. +25 °C.

      • Stir well, including during application or after a break in work.

        Apply material evenly with a brush or by spraying.

        It is recommended to apply by spraying then touch up with the brush.

        Flow cup gun: nozzle size: 1.0 - 1.6 mm, atomiser air pressure: 1.0 - 2.0 bar.

        Seal opened containers well and use contents as soon as possible.

    • Application instructions
      • Drying time: can be worked over after 2-3 h
      • Check colour, adhesion and compatibility with the substrate by setting up a trial area.

      • Drying

        Ready for next coat: after approx. 2 - 3 hours

        Practice values at +20 °C and 65% relative humidity.

        Low temperatures, poor ventilation and high humidity delay drying.

      • Thinning

        With Aqua KB-004 clear or water

    • Working tools / cleaning
      • By brush / Flow cup gun
      • Flow cup gun, brush with natural bristles (metal-free ferrule)

      • Clean tools with water or Aqua RK-898 Cleaning Concentrate immediately after use.

        Ensure that any residue from cleaning is disposed of correctly.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • Shelf-life 12 months
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • Approx. 60 ml - 100 ml / m² per layer applied
      • Approx. 60 - 100 ml/m² (plus spraying loss)

    • General information
      • Pour diluted stain into a rust-proof container and use up promptly.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.