• Anti-Insekt
  • Anti-Insekt
    • Anti-Insekt
    • Anti-Insekt

    Article No. 205901


    Liquid, solvent-based wood preserving agent with control action for use by professionals

    Colour: clear | 2059
    Colour: clear | 2059
    Please choose a colour



    Safety instructions

    • Use biocides safely. Always read the label and product information before using!

    Product specifications

    On delivery

    Density (20°C) Approx. 0.80 g/cm³
    Flash point Approx. 63 °C
    Odour Characteristic
    Runout time s (20° C, DIN 4) 11

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use indoors and wood not directly exposed to weather
    • For professional users only
    • Wood in interiors and in protected outside areas
    • Control of wood-destroying insects for wooden building elements such as roof trusses, wooden beams, floors, etc.
    • House borer and deathwatch beetle
    • Not suitable for termite control


    • Solvent-based
    • Test predicates:
      Ib = effective control of insects
      Iv = preventive effect against insects
    • Fast-acting control
    • Preventive effect against new infestations
    • Contains low-odour solvents
    • High penetration capacity
    • Preparation
      • Substrate requirements

        Determine the nature and extent of the infestation.

        In case of doubt, consult a structural engineer.

        Strip away infested wood down to the deepest feeding tunnels.

        If wooden building elements have suffered significant structural impairment, reinforce or replace them with timber that has been given preventive treatment.

      • Preparations

        Remove decomposed wood and loose wood fibres with a steel brush.

    • Application
      • By brush / Spraying
      • Apply by brushing or spraying.

        The necessary application quantity is usually reached in 2-3 treatments.

        When using for infestation control in recreation rooms or adjoining rooms, use of the room as a recreation room is only permitted from 4 weeks after the treatment.

        Seal opened containers well and use contents as soon as possible.

    • Application instructions
      • Drying time: can be worked over after 24 h
      • Once dry, the treated wood can be further treated with Remmers wood products and fireproofing systems after no sooner than four weeks.

      • Drying

        Approx. 24 hours

        Practice values at +20 °C and 65% relative humidity.

        Low temperatures, poor ventilation and high humidity delay drying.

      • Thinning

        Ready to use

    • Working tools / cleaning
      • By brush / Spraying
      • Paintbrush wiht natural bristles, low-pressure spraying equipment

      • Clean tools immediately after use with V 101 Thinner.
        Dispose of the remains from cleaning properly.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • Store in well-sealed, original containers, out of the reach of children and in a dry, cool, well-ventilated room which is protected from direct sunlight and frost. No smoking is permitted in storage areas.

    • Usage
      • Control measures: 300-350 ml/m²

        Preventive protection in the context of an application for controlling purposes (GK 1 only):
        200-250 ml/m²

    • General information
      • The product has been evaluated according to the Biocidal products regulation (EU) No. 528/2012 and approved by the Federal Institute for Occupational Safety and Health (BAuA). This approval replaces the general approval by the German Institute for Building Technology (DIBt).

        In accordance with DIN 68800-1, wood preservation measures must be planned in a timely and careful manner in coordination with all parties involved in the construction (architect, client, contractor) taking into account legal requirements and local conditions.

    • Disposal instructions
      • During use, all product losses must be collected and reused or disposed of as hazardous waste. The product and its residues must not be discharged into drains, sewers or directly into soil or water. The product must not be allowed to enter waste water when cleaning equipment.

        European waste code 03 02 02* organochlorinated wood preservatives

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.

    Different variants