Article No. 194601
Additive for improving the adhesion of PUR lacquers on glass
Product specifications
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Coloured designs on the rear face of glass surfaces
- Furniture building and shop fitting
- Can be used with a wide range of Remmers PUR lacquers
Properties
- Significant improvement in adhesion of lacquer on glass
- Cost-effective alternative also suitable for small production runs
- Easy to use
-
Preparation
-
Substrate requirements
The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.
-
-
Application
-
Seal opened containers well and use contents as soon as possible.
-
-
Application instructions
-
Check colour, adhesion and compatibility with the substrate by setting up a trial area.
-
-
Storage / shelf life
-
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 6 months.
-
-
Disposal instructions
-
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-
