Article No. 28343010
Solvent-based, white two-component acrylic primer for mixing systems for windows and doors, for spray application
Product specifications
On delivery
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- For use on interior and exterior wood
- Soft and hard woods
- Dimensionally stable wood building elements: e.g. doors, windows and shutters
- For folding shutters made of multi-ply Okoume
- Adhesive primer for old structures on windows and exterior doors
- For use by professionals
Properties
- Excellent flow properties
- High stability
- Reduces upright fibres
- Good sanding properties
- Good sealing effect
- Good moisture protection
-
Preparation
-
Substrate requirements
The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.
Dimensionally stable wood building elements: wood moisture content 11-15%
-
Preparations
Remove resin galls.
If necessary, impregnate non-resistant woods with a wood preservative* (*Use biocides safely. Always read the label and product information before use).
-
-
Application
-
Stir well.
Airless spraying: nozzle size: 0.23 - 0.28 mm, material pressure: 80 - 120 bar.
Airmix spraying: nozzle size: 0.23 - 0.28 mm, spray pressure: 80 - 100 bar, air pressure: 1.2 - 2.0 bar.
After priming, apply the first intermediate coating by spraying. Once dry, carry out intermediate sanding with P280. Apply a second intermediate coat by spraying. After leaving to dry overnight, apply a finishing coat of Induline LW-700.
Seal opened containers well and use contents as soon as possible.
-
-
Application instructions
-
If necessary, check compatibility with the substrate and sealing effect by applying a trial coat.
Before coating technically modified woods and wood-based materials, apply the product to a trial surface and conduct a suitability test on the desired area of use.
Ensure good ventilation.
-
Drying
Dust-dry: after 40 - 50 minutes
Sanding: after approx. 2 hours
Can be overcoated with a water-based finishing coat after min. 12 and max. 24 hours. At longer waiting times, interim sanding must be performed and a new intermediate coating applied. -
Thinning
The product is ready to use; dilute with 5 to 10% V-890 thinner if necessary.
-
-
Working tools / cleaning
-
Hand spray gun, automatic spraying equipment
-
Clean tools using WV-891 Brush Wash or V-890 Thinner.
Ensure that any residue from cleaning is disposed of correctly.
-
-
Storage / shelf life
-
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
-
-
Usage
-
125 - 150 ml/m² per coat
(equivalent to a wet film thickness of 125 - 150 µm and a dry film thickness of 55 - 70 µm)
-
-
Disposal instructions
-
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-
