Article No. 2152960
Alkoxy-crosslinking silicone sealant
Product specifications
On delivery
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Dimensionally stable wood building elements: e.g. windows and doors
- Waterproofing and backfilling of window casement frames and glazing bars
- For use by professionals
Properties
- Protects against condensation in the glazing rebate
- Reduces heat loss by sealing off the glazing rebate
- Optimised adhesion profile for easy removal of glazing bars
- Permanently elastic
- Coating-compatible according to DIN 52452, part 4
- Easy to apply
- Tested compatibility with commonly used materials: edge compound, glazing packers, laminated glass
- Colour-matched to the edge compound
- Very low emissions (GEV-EMICODE EC 1Plus)
- Complies with the principles for the health assessment of construction products used indoors (AgBB scheme)
-
Preparation
-
Substrate requirements
The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.
-
Preparations
Compatibility with the materials used must be ensured. Please refer to the compatibility list.
Contact Remmers Technical Service if necessary.
-
-
Application
-
Cut off tip at an angle according to the width of the joint and inject, filling the joint completely.
Apply to the joint edges using sufficient pressure.
-
-
Working tools / cleaning
-
Manual and compressed-air gun
-
-
Storage / shelf life
-
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
-
-
Usage
-
Approx. 25 ml/running metre for a 0.25 cm² joint cross-section
-
-
General information
-
Observe the regulations of Code of Practice No. 10 from the "Industrieverband Dichtstoffe" (Association of the Sealants Industry, IVD).
Not suitable for sealing glazing rebates.
Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.
The relevant test certificates must be observed when planning and carrying out work.
-
-
Disposal instructions
-
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-
